Table of Contents
Advertisement
Activating Cruise Control
To turn on the cruise control system,
press the SET/- button. The cruise
control symbol will be shown in the
display screen. The cruise control set
speed will be shown as '--' indicating
that a speed has not yet been set.
To activate cruise control, the following
conditions have to be met:
▼ The motorcycle must be traveling
at a speed between 29 to 100 mph
(46 to 160 km/h).
▼ The motorcycle must be in 3
or higher.
▼ Once these conditions have been
met, press the SET/- button to
activate cruise control. The cruise
control symbol will be shown in a
green light in the TFT display to
indicate that cruise control is now
active.
The word SET will be shown next to
the cruise control symbol. The cruise
control set speed will be shown and
the cruise control light will illuminate in
the tachometer indicating that cruise
control is active.
1
12:34
SET
50
AM
5
5
4
4
6
6
50
3
3
7
7
2
2
MPH
8
8
5
9
9
1
1
10
10
0
F
E
1.
Cruise control symbol
2.
Cruise control set indicator
3.
Cruise control set speed
gear
rd
2
3
15
GENERAL INFORMATION
The cruise control system will maintain
the set speed until:
▼ The
set
described on page 69.
▼ Cruise control is deactivated as
described on page 70.
Adjusting the Set Speed While in
Cruise Control
To adjust the set speed while in cruise
control, press and release the:
▼ RES/+ button to increase the speed
▼ SET/- button to decrease the speed.
Each press of the buttons will adjust
the speed by 1 mph or 1 km/h. If
the
buttons
continuously increases or decreases in
single digit increments.
Stop pressing the adjust button when
the required speed is shown in the
display.
The cruise control set speed display will
flash until the new set speed has been
achieved.
If riding up a steep incline and cruise
control is unable to maintain the set
speed, the cruise control set speed
display will flash until the motorcycle
has regained the set speed.
c
o
An alternative way to increase the
speed in cruise control is to accelerate
to the required speed using the throttle
grip and then press the SET/- button.
speed
is
adjusted
are
held,
the
69
as
speed
Advertisement
Chapters
Table of Contents
