Compression Damping Adjustment; Rear Suspension; Rear Suspension Inspection - Triumph Daytona 675 2014 Owner's Handbook Manual

Compression Damping Adjustment

1
1. Compression damping adjuster
The compression damping adjuster is
located at the top of the left hand fork.
To change the compression damping
force, rotate the adjuster clockwise to
increase, or counterclockwise
decrease using a 0.12 in (3 mm) Allen key.
Always count the number of clicks from
the fully clockwise position noting that
the first stop (click position) is counted
as zero.
Maintenance and Adjustment

Rear Suspension

Rear Suspension Inspection

Examine the shock absorber for any sign
of damage, or for oil leaks.
If any damage or leakage is found,
consult an authorized Triumph dealer.
Note:
• The Street Triple is delivered from
the factory with the rear suspension
spring preload adjuster set to the
rider only position, as shown in the
suggested suspension settings chart
(see page 121).
• The Daytona 675,
Street Triple R and Street Triple Rx
are delivered from the factory with
the rear suspension set at the
standard/sport settings, as shown in
to
the relevant suspension chart (see
page 120).
• These charts are only a guide.
Setting requirements may vary for
rider weight
preferences. See the following pages
for information regarding suspension
adjustment.
Warning
Ensure that the correct balance
between front and rear suspension is
maintained. Suspension
could significantly change handling
characteristics leading to loss of
control and an accident. Refer to the
front and rear suspension setting
charts for further information or
consult your dealer.
Daytona 675 R,
and personal
imbalance
119