Tire Wear; Minimum Recommended Tread Depth - Triumph Daytona 675 2014 Owner's Handbook Manual

Tire Wear

As the tire tread wears down, the tire
becomes more susceptible to punctures
and failure. It is therefore
recommended to use tires until they are
worn to their minimum.
Minimum Recommended Tread
Depth
In accordance with
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tire that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80 mph 0.08 in (2 mm)
(130 km/h)
Over 80 mph Rear 0.12 in (3 mm)
(130 km/h) Front 0.08 in (2 mm)
Warning
This motorcycle must not be operated
above the legal road speed limit
except in authorized closed-course
conditions.
Maintenance and Adjustment
Only operate this Triumph motorcycle
not
at high speed in closed-course on-road
competition
racetracks.
should only then be attempted by
riders who have been instructed in the
techniques necessary for high-speed
the periodic
riding and are familiar with the
motorcycle's
conditions. High-speed operation in
any other circumstances is dangerous
and will lead to loss of motorcycle
control and an accident.
Operation with excessively worn tires
is hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When
punctured, leakage is often very slow.
Always inspect tires very closely for
punctures. Check the tires for cuts,
embedded
objects. Operation with punctured or
damaged tires will adversely affect
motorcycle
which may lead to loss of control or an
accident.
Check
deformation. Operation with damaged
or defective
dangerous and loss of motorcycle
control or an accident could result.
Always
Triumph dealer for tire replacement, or
for a safety inspection of the tires.
Warning
or on closed-course
High-speed operation
characteristics in
Warning
tubeless tires become
nails or other sharp
stability and handling
the rims for dents
wheels or tires
consult your authorized
all
or
is
127