Fuel Gauge; Instrument Scroll/Set Buttons; Clock - Triumph Street Triple S Owner's Handbook Manual

Fuel Gauge

The fuel gauge indicates the amount of
fuel in the tank.
2
1. Fuel gauge
2. SET Button
With the ignition switched on, the
number of bars shown in the display
indicates the level of fuel.
When the fuel tank is full all eight bars
are displayed and when empty, no bars
are displayed. Other gauge markings
indicate intermediate
between full and empty.
When two bars are displayed the low
fuel warning light will illuminate. This
indicates there
4.5 litres of fuel remaining in the tank
and you should refuel at the earliest
opportunity. If a trip meter display is
shown, the range to empty display can
be selected by pressing and releasing
the SET button until it is shown.
After refuelling, the fuel gauge and
range to empty information will be
updated only
motorcycle. Depending on the riding
style, updating could take up to five
minutes.
1
fuel levels
are approximately
while riding the
GENERAL INFORMATION

Instrument SCROLL/SET Buttons

SCROLL Button
When the SCROLL button is pressed
and released it will scroll through the
menu shown in the instrument display
screen.
The SCROLL button is used to operate
the following
instruments:
▼ Set Up (SEtUP)
– Traction Control
page 86

– Clock

Adjustment
page 87
– Service Interval Announcement
(SIA), see page 88
– Gear Change Lights (SHIFt), see
page 88
– Units (UnitS), see page 90.
▼ Return (REtURn)
SET Button
When the SET button is pressed it will
select the menu
instrument display screen.
functions of the
(ttc), see
(t-SEt), see
shown in the
85