Table of Contents
Advertisement
Configuring a
MacIntosh for a static IP
address
6. Ensure that both
Obtain an IP address automatically
Obtain DNS server address automatically
selected. If not, select them.
7. Select OK to close the open dialog boxes and finish the
configuration.
8. Restart the computer even if Windows does not require you to
do so. This ensures the network settings are automatically
reset.
Follow the steps below to configure a terminal with a static IP
address on a MacIntosh system.
1. Select
System Preferences
Systems Preference menu appears.
2. Select the
Network
Network screen shown in Figure 50 appears.
Figure 49: Mac Systems Preferences menu
Appendix B • Typical operating system settings
from the Mac interface. The
icon, which is circled in Figure 49. The
1035978-0001 Revision A
and
options are
69
Advertisement
Table of Contents
