Confirming transmit signal
Chapter 4 • Troubleshooting
30
1035978-0001 Revision A
The terminal will not function if satellite signals are not
transmitted properly.
1. At the System Control Center, click on the Transmission
Info indicator. The Transmission Information page appears.
See Figure 20.
Figure 20: Confirming transmit signal
2. In the
Transmit Status
If
Transmitter available for Normal Operation
appears in the
(TxCode 8)
terminal is transmitting signals properly. Proceed to the next
troubleshooting step.
If any other code appears, the terminal is not transmitting
signals properly. Click on the code, which is a link, and
follow the troubleshooting procedure that appears.
field, check the transmit (Tx) code.
Transmit Status
field, the