Confirming Tcp Acceleration Is Operational - Hughes DIRECWAY DW7000 User Manual

Confirming TCP
acceleration is operational
Transmission Control Protocol (TCP) Acceleration is a
proprietary protocol provided by DIRECWAY. It optimizes
performance for TCP and Internet Protocol (IP)-based
applications, including faster downloads over satellite.
1. At the System Control Center, click on the System Status
indicator. The System Status page appears. See Figure 21.
Figure 21: Confirming TCP acceleration is operational
2. Check the message in the
If the message says
enabled. Proceed to the next troubleshooting step.
If the message says
disabled. Perform the following steps:
a. Check that receiving and transmitting are working. If they
are not, troubleshoot them as per the previous two sections.
b. If receiving and transmitting are working but TCP
Acceleration is still not operational, power cycle the
terminal by unplugging the power cord from the power
source, waiting 10 seconds, and plugging it back in. Check
the TCP Acceleration status again. If it is not operational,
or operational but you still cannot surf the Internet,
proceed to the next troubleshooting step.
c. If TCP Acceleration is still disabled after power cycling,
contact customer support for assistance.
TCP Acceleration Status
, TCP Acceleration is
Operational
, TCP Acceleration is
Not Operational
Chapter 4 • Troubleshooting
1035978-0001 Revision A
row.
31