Ip Address/Dhcp Settings - Hughes 9202 User Manual

IP Address/DHCP Settings


Using the Web UI
38
3004149-0001 Revision C
Terminal Local IP Address: This section allows the user to
change the local IP address of the terminal from the default
192.168.128.100 IP address. All four octets are available to
change. Once the local IP address is changed on this page and
applied, the IP address ranges for the DHCP server, the Manage
Context page and ACA page will also be changed automatically.
Updates to the IP address will not take effect until the UT is
rebooted.
DHCP Server: allows the DHCP server in the UT to be turned
on or off by checking the Enable box.
DHCP Address Range: This allows the user to set the range of
DHCP addresses that are given out by the UT to connected TEs.