Usb Driver Installation - ICP DAS USA DGW-521 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

1.8 USB Driver Installation

To connect the DGW-521 via the USB port, the USB driver
must be installed. The driver installation file can be
downloaded from ICP DAS web site
http://ftp.icpdas.com.tw/pub/cd/usb_tm/napdos/dgw-521/
accompany CD. The installation procedure is as follows:
1. Execute icpusbconverter_drvinst_v1.x.exe to install the
necessary driver files to the system.
2. Plug in the DGW-521 to the USB port and Windows will
detect the new device and shows the message "Found New
Hardware Wizard" screen prompting you to install the driver
for the detected USB Device. Please select "No, not this
time" option and click "Next" button.
3. Select "install from a list or specific location (Advanced)"
option and click "Next" button.
4. Select "Search for the best driver in these locations" option
and check "include this location in the search:" checkbox
and click "Browser" button to assign the DGW-521 driver
location - C:\WINDOWS\inf\ and then click "Next" button.
5. Click "Continue Anyway" button.
6. Click "Finish" button to complete DGW-521 device driver
installation.
DGW-521 User Manual, Rev. A1.0
or the
13