Issue Cards To Persons In Batch; Report Card Loss - HIKVISION DS-K3B961TX-L User Manual

Note
If you select the enrollment station, you should click Login, and enter IP address, port No., user
name and password of the device.
5. Select the Getting Mode.
Note
The getting mode varies according to different devices. The access control device supports
getting the person information by employee ID. Up to 5 employee IDs can be specified each
time.
6. Click Import to start importing the person information to the client.
Note
Up to 2,000 persons and 5,000 cards can be imported.
The person information, including person details, person's fingerprint information (if
configured), and the linked cards (if configured), will be imported to the selected organization.

8.4.4 Issue Cards to Persons in Batch

The client provides a convenient way to issue cards to multiple persons in a batch.
Steps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel.
3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need
issuing cards.
4. Optional: Click Settings to set the card issuing parameters. For details, refer to .
5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing
cards.
6. Click the Card No. column and enter the card number.
- Place the card on the card enrollment station.
- Swipe the card on the card reader.
- Manually enter the card number and press the Enter key.
The person(s) in the list will be issued with card(s).

8.4.5 Report Card Loss

If the person lost his/her card, you can report the card loss so that the card's related access
authorization will be inactive.
DS-K3B961TX Series Swing Barrier User Manual
86