Turnstile - HIKVISION DS-K3B961TX-L User Manual

Steps
Note
Some device models do not support this function. Refer to the actual products when configuration.
1. Click Configuration → Access Control → Wiegand Settings .
2. Select Entrance or Exit.
3. Check Wiegand to enable the Wiegand function.
4. The wiegand transmission direction is set Input by default.
Note
Input: the device can connect a Wiegand card reader.
5. Click Save to save the settings.
Note
If you change the peripheral, and after you save the device parameters, the device will reboot
automatically.

7.8.20 Turnstile

Basic Parameters
Set turnstile basic parameters.
Steps
1. Click Configuration → Turnstile → Basic Parameters to enter the page.
DS-K3B961TX Series Swing Barrier User Manual
65