3. Power on the turnstile and it will enter the keyfob pairing mode.
4. Hold the Close button for more than 10 seconds.
The keyfob's indicator of the will flash twice if the pairing is completed.
5. Set the No.2 switch to the OFF side, and reboot the turnstile to take effect.
Note
Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the
●
keyfob will select only one of them to pair.
For details about DIP switch value and meaning, see DIP Switch Description .
●
6. Optional: Go to System → User → Keyfob User on the remote control page of the client
software to delete the keyfob.
5.3 Initialize Device
Steps
1. Hold the initialization button.
DS-K3B961TX Series Swing Barrier User Manual
Figure 5-3 Enable Keyfob Paring Mode
30