Table of Contents
Advertisement
Enable CPU Card
Enable CPU card and authenticating by presenting CPU card is available.
CPU Card Read Content
After enable the CPU card content reading function, the device can read the CPU card content.
Enable ID Card
Enable ID card and authenticating by presenting ID card is available.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card function.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → General → Card Authentication Settings .
Select a card authentication mode and enable reversed card No. at your actual needs. Click Save.
7.8.19 Access Control Settings
Access Control Device Parameters
Set door contact settings and RS-485 protocol.
Steps
1. Click Configuration → Access Control → Access Control Device Parameters to enter the page.
2. Set door contact.
Note
You can set the door contact as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Closed.
3. Set RS-485 protocol.
4. Click Save.
Set Door Parameters
Click Configuration → Access Control → Door Parameters .
DS-K3B961TX Series Swing Barrier User Manual
62
Advertisement
Table of Contents
