DS-K3B961TX Series Swing Barrier User Manual
Appendix B. DIP Switch
B.1 DIP Switch Description
The DIP switch is on the main user extended interface board. No.1 to No 4 is from the low bit to
the high bit.
Figure B-1 DIP Switch
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.
B.2 DIP Switch Corresponded Functions
Note
After setting the DIP switch, you should reboot the device, or the function cannot take effect.
The 4-bit DIP switch corresponded functions on the access control board are as follows:
107