1.1 Introduction
The flap barrier with two barriers and 24 IR lights is designed to detect unauthorized entrance or
exit. By adopting the flap barrier integratedly with the access control system, person should
authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc. It is widely
used in attractions, stadiums, construction sites, residences, etc.
1.2 Main Features
32-bit high-speed processor
●
IP address conflict detection
●
Remote control and management
●
Online/offline operation
●
TCP/IP network communication
●
The communication data is specially encrypted to relieve the concern of privacy leak
Person authentication
●
Permissions validation and anti-tailgating
●
Control mode, sensing mode, remaining open/closed mode and free passing mode selectable
●
Bidirectional (Entering/Exiting) lane
The barrier opening and closing speed can be configured according to the visitor flow
Single or multiple IR detector triggering
●
Opens/Closes barrier according to the schedule template
●
Cross controller anti-passback
●
The barrier will be locked or stop working when people are nipped
●
Anti-forced-accessing
●
The barrier will be locked automatically without open-barrier signal. It can bear the force of up
to 120 Nm
Self-detection, Self-diagnostics, and automatic alarm
●
Audible and visual alarm will be triggered when detecting intrusion, tailgating, reverse passing,
●
and climbing over barrier
Barrier is in free status when powered down; If the device is installed with lithium battery
●
(optional), the barrier remains open when powered down
Fire alarm passing
●
When the fire alarm is triggered, the barrier will be open automatically for emergency
evacuation
Valid passing duration settings
●
System will cancel the passing permission if a person does not pass through the lane within the
valid passing duration
Up to 10,0000 faces, up to 50,0000 cards and up to 100,000 events except can be added
●
DS-K3B961TX Series Swing Barrier User Manual
Chapter 1 Overview
1