7.8.2 View Device Information
View the device name, language, model, serial No., version, number of channels, IO input, IO
output, Local RS-485, alarm input, alarm output, and device capacity, etc.
Click Configuration → System → System Settings → Basic Information to enter the configuration
page.
You can view the device name, language, model, serial No., version, number of channels, IO input,
IO output, Local RS-485, alarm input, alarm output, and device capacity, etc.
7.8.3 Set Time
Set the device's time zone, synchronization mode, and the device time.
Click Configuration → System → System Settings → Time Settings .
Click Save to save the settings after the configuration.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the alarm receiver type, NTP server's IP address, port No., and interval.
Manual
DS-K3B961TX Series Swing Barrier User Manual
Figure 7-5 Time Settings
44