Table of Contents
Advertisement
5. Set the No.1 switches of the 4-digit DIP Switch on the main user extended interface board by
referring to the following figure.
6. Power on the device again.
Note
For details about the DIP switch value and meaning, see DIP Switch Description.
The barrier will open automatically and turns back to the closed position. At this circumstance,
the device enters the normal mode.
5.2 Pair Keyfob (Optional)
Pair the remote control to the device through DIP switch to open/close the barrier remotely.
Before You Start
Ask our technique supports or sales and purchase the keyfob.
Steps
1. Power off the turnstile.
2. Set the No.2 switch of the DIP 1 Switch on the access control board to the ON side.
DS-K3B961TX Series Swing Barrier User Manual
Figure 5-2 Normal Mode
29
Advertisement
Table of Contents
