Configure Advanced Functions - HIKVISION DS-K3B961TX-L User Manual

3) Click Apply All to Devices or Apply Changes to Devices.
Apply All to Devices
This operation will clear all the existed access groups of the selected devices and then
apply the new access group to the device.
Apply Changes to Devices
This operation will not clear the existed access groups of the selected devices and only
apply the changed part of the selected access group(s) to the device(s).
4) View the applying status in the Status column or click Applying Status to view all the applied
access group(s).
Note
You can check Display Failure Only to filter the applying results.
The selected persons in the applied access groups will have the authorization to enter/exit the
selected doors/door stations with their linked card(s) or fingerprints.
9. Optional: Click
Note
If you change the persons' access information or other related information, you will view the
promptAccess Group to Be Applied on the right corner of the client.
You can click the prompt to apply the changed data to the device. You can select either Apply
Now or Apply Later.

8.7 Configure Advanced Functions

You can configure the advanced functions of access control to meet some special requirements in
different scene, such as multi-factor authentication, anti-passback, etc.
DS-K3B961TX Series Swing Barrier User Manual
to edit the access group if necessary.
Figure 8-3 Data Synchronization
92