HIKVISION DS-K3B631TX Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Automatic Barriers
  5. DS-K3B631TX Series
  6. User manual
HIKVISION DS-K3B631TX Series User Manual

HIKVISION DS-K3B631TX Series User Manual

Swing barrier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3B631TX Series Swing Barrier
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K3B631TX Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K3B631TX Series

Summary of Contents for HIKVISION DS-K3B631TX Series

  • Page 1 DS-K3B631TX Series Swing Barrier User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K3B631TX Series Swing Barrier User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-K3B631TX Series Swing Barrier User Manual This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 6 DS-K3B631TX Series Swing Barrier User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 7 DS-K3B631TX Series Swing Barrier User Manual Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Page 8 DS-K3B631TX Series Swing Barrier User Manual Please keep all wrappers after unpack them for future use. In case of any failure occurred, you ● need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
  • Page 9 DS-K3B631TX Series Swing Barrier User Manual Available Models Product Name Model Description Swing Barrier DS-K3B631TX-L Left Pedestal DS-K3B631TX-M Middle Pedestal DS-K3B631TX-R Right Pedestal viii...

  • Page 10: Table Of Contents

    DS-K3B631TX Series Swing Barrier User Manual Contents Chapter 1 Overview ........................1 1.1 Introduction ........................... 1 1.2 Main Features ........................1 Chapter 2 Light Introduction ....................... 3 2.1 Light Description ........................3 2.2 Side Light Board DIP Switch Description ................4 Chapter 3 System Wiring ......................
  • Page 11 DS-K3B631TX Series Swing Barrier User Manual 5.3.15 Barrier Control Wiring ....................31 5.3.16 Alarm Output Wiring ....................31 5.3.17 Alarm Input Wiring ....................32 Chapter 6 Device Settings ......................34 6.1 Set Study Mode ........................34 6.2 Pair Keyfob (Optional) ......................35 6.3 Initialize Device ........................
  • Page 12 DS-K3B631TX Series Swing Barrier User Manual 9.6.2 Set Time ........................61 9.6.3 Set DST ........................62 9.6.4 Change Administrator's Password ................63 9.6.5 Online Users ........................ 63 9.6.6 View Device Arming/Disarming Information .............. 63 9.6.7 Network Settings ......................63 9.6.8 Set Video and Audio Parameters ................65 9.6.9 Set Image Parameters ....................
  • Page 13 DS-K3B631TX Series Swing Barrier User Manual 10.3.3 Keyfob Settings ......................100 10.3.4 Light Settings ......................101 10.3.5 Network Settings ..................... 105 10.3.6 Device Basic Settings ....................108 10.3.7 Access Control Settings ................... 110 10.3.8 Face Parameters Settings ..................118 10.3.9 View Device Information ..................122 10.3.10 Device Capacity .....................
  • Page 14 DS-K3B631TX Series Swing Barrier User Manual 11.5.2 Add Template ......................136 11.6 Set Access Group to Assign Access Authorization to Persons .......... 137 11.7 Configure Advanced Functions ..................139 11.7.1 Configure Device Parameters .................. 140 11.7.2 Configure Other Parameters ................... 147 11.8 Door/Elevator Control ......................

  • Page 15: Chapter 1 Overview

    DS-K3B631TX Series Swing Barrier User Manual Chapter 1 Overview 1.1 Introduction Figure 1-1 Appearance The flap barrier with two barriers and 20 IR lights is designed to detect unauthorized passing from the entrance or exit. By adopting the flap barrier integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc.
  • Page 16 DS-K3B631TX Series Swing Barrier User Manual The barrier opening and closing speed can be configured according to the visitor flow Single or multiple IR detector triggering ● Opens/Closes barrier according to the schedule template ● Cross controller anti-passback ● The barrier will be locked or stop working when people are nipped ●...

  • Page 17: Chapter 2 Light Introduction

    DS-K3B631TX Series Swing Barrier User Manual Chapter 2 Light Introduction Description of light and how to set light via DIP switch. 2.1 Light Description Figure 2-1 Light Position Side Light The side light indicates different status of the lane, including inductive, prohibited and authenticated passing.

  • Page 18: Side Light Board Dip Switch Description

    DS-K3B631TX Series Swing Barrier User Manual Barrier Light The barrier light stays white by default. You can set the barrier light color at your needs. The barrier light will not change color according to the lane status or authentication results.
  • Page 19 DS-K3B631TX Series Swing Barrier User Manual Table 2-1 Light Board DIP Switch Description Position Address Value (Start from Left) 0000 1000 0100 1100 0010 1010 0110 1110 1000 0001 1001 1001 1010 0101 1011 1101 1100 0011 1101 1011 1110...
  • Page 20 DS-K3B631TX Series Swing Barrier User Manual Figure 2-3 Side Light Position Single-Lane Scenario In single-lane scenario, the side lights are located at the position of NO. 1, 3, 4, 6. Side light No. 1 is near the main user extended interface board.
  • Page 21 DS-K3B631TX Series Swing Barrier User Manual Position Address Value No. 5 0100 No. 6 0100...

  • Page 22: Chapter 3 System Wiring

    DS-K3B631TX Series Swing Barrier User Manual Chapter 3 System Wiring The preparation before installation and general wiring. Steps Note The device should be installed on the concrete surface or other non-flammable surfaces. ● If the installation area is too close to the wall, make sure the distance between the pedestal and ●...
  • Page 23 DS-K3B631TX Series Swing Barrier User Manual The dimension is as follows. ●...
  • Page 24 DS-K3B631TX Series Swing Barrier User Manual Figure 3-1 Dimension 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals. Note The distance between the nearest two line is L + 284 mm. L represents the lane width.
  • Page 25 DS-K3B631TX Series Swing Barrier User Manual Figure 3-2 Hole Position Diagram 4. Bury cables. Each lane buries 1 high voltage cable and 1 low voltage cable. For details, see the system wiring diagram in step 3. Note High voltage: AC power input ●...

  • Page 26: Chapter 4 Installation

    DS-K3B631TX Series Swing Barrier User Manual Chapter 4 Installation 1. After system wiring, put the pedestals on the proper position and fix each pedestal with 6 expansion bolts. Figure 4-1 Expansion Bolts position 2. Open the side panel with the key for cable wiring or device maintenance.
  • Page 27 DS-K3B631TX Series Swing Barrier User Manual Figure 4-2 Key Hole Note For left and right pedestals, both side panels opens toward the passing lane. For middle pedestals, the side panel at the entrance opens toward the left passing lane, and the other side...

  • Page 28: Chapter 5 General Wiring

    DS-K3B631TX Series Swing Barrier User Manual Chapter 5 General Wiring Note When you should maintain or disassemble the high voltage modules, you should remove the ● entire high voltage modules and maintain it outside the turnstile. You should unplug the cables that connected to the peripherals before maintenance to avoid destroy of the device.
  • Page 29 DS-K3B631TX Series Swing Barrier User Manual Figure 5-1 Components Diagram Note For details about wiring arrangement, refers to the actual device. The picture displayed below describes the IR adapter and the IR sending/receiving module and their corresponding number on the pedestal.

  • Page 30: Wiring

    DS-K3B631TX Series Swing Barrier User Manual Figure 5-2 IR Modules Note For details about wiring arrangement, refers to the actual device. ● If the turnstile contains two lanes, standing at the entrance position, the IR modules on the left ●...
  • Page 31 DS-K3B631TX Series Swing Barrier User Manual The gray CAT5e cable is used for connection between main lane control board and sub lane control board, and is placed inside of the package of the right/middle pedestal. You need to plug the cable into the gray adaptor.

  • Page 32: Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual 5.3 Terminal Description The lane controller contains main lane controller and sub lane controller, which controls the IR beams, motor, and other components' work. 5.3.1 Main Lane Control Board Terminal Description The main lane control board contains debugging port, access control board communication...

  • Page 33: Main Access Control Board Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual The picture displayed below is the sub control board diagram. Figure 5-5 Sub Lane Control Board Terminal 5.3.3 Main Access Control Board Terminal Description The main access control board contains screen adapter interface, sensor interface, loudspeaker...

  • Page 34: Sub Access Control Board Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual Figure 5-6 Main Access Control Board Terminal 5.3.4 Sub Access Control Board Terminal Description The sub access control board contains screen adapter interface, sensor interface, loudspeaker interface, IR light interface, user extended interface board and lane control board communication interface, sub access control board interface, power interface, card reader board interface, TF card slot, initialization button, debugging port and USB flash drive interface.
  • Page 35 DS-K3B631TX Series Swing Barrier User Manual Figure 5-7 Sub Access Control Board Terminal...

  • Page 36: Main User Extended Interface Board

    DS-K3B631TX Series Swing Barrier User Manual 5.3.5 Main User Extended Interface Board Figure 5-8 Main User Extended Interface Main User Extended Interface Description I2C Interface Reserved Event Input CASE1 Event Alarm Input 1 CASE2 Event Alarm Input 2...
  • Page 37 DS-K3B631TX Series Swing Barrier User Manual Main User Extended Interface Description Grounding RS-232 Interface 232RX Connect to Card Reader RS- 232RX 232TX Connect to Card Reader RS- 232TX RS-485 485- Connect to Card Reader RS485- 485+ Connect to Card Reader...
  • Page 38 DS-K3B631TX Series Swing Barrier User Manual Main User Extended Interface Description Power Output 3 5VOUT1 5 VDC Power Output 1 5VOUT1 5 VDC Power Output 2 Grounding Exit Button Door Signal Input Grounding Fire Input ALARM IN Fire Alarm Input...

  • Page 39: Sub User Extended Interface Board

    DS-K3B631TX Series Swing Barrier User Manual 5.3.6 Sub User Extended Interface Board Figure 5-9 Sub User Extended Interface Main User Extended Interface Description Event Input CASE1 Reserved CASE2...
  • Page 40 DS-K3B631TX Series Swing Barrier User Manual Main User Extended Interface Description RS-232 Interface 232RX Connect to Card Reader RS- 232RX 232TX Connect to Card Reader RS- 232TX RS-485 485- Connect to Card Reader RS485- 485+ Connect to Card Reader RS485+...

  • Page 41: User Core Board Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual 5.3.7 User Core Board Terminal Description The user core board terminal contains network interface, BUS, USB card reader interface, access control board communication interface, card receiver and RS-485 card reader interface, power interface, programming interface and debugging port.

  • Page 42: Arrow Light Board Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual 5.3.9 Arrow Light Board Terminal Description Figure 5-12 Arrow Light Board 5.3.10 Upper IR Adapter Board Terminal Description Figure 5-13 Upper IR Adapter Board Note Set DIP switch 1 to ON side.

  • Page 43: Lower Ir Adapter Board Terminal Description

    DS-K3B631TX Series Swing Barrier User Manual 5.3.11 Lower IR Adapter Board Terminal Description Figure 5-14 Lower IR Adapter Board Note Set DIP switch 2 to ON side. 5.3.12 RS-485 Wiring The main and sub user extended interface board each has one RS-485 interface.

  • Page 44: Wiring

    DS-K3B631TX Series Swing Barrier User Manual Figure 5-15 RS-485 Wiring 5.3.13 RS-232 Wiring Note The main and sub user extended interface board each has two RS-232 interface. Figure 5-16 RS-232 Wiring 5.3.14 Wiegand Wiring...

  • Page 45: Barrier Control Wiring

    DS-K3B631TX Series Swing Barrier User Manual 5.3.15 Barrier Control Wiring According to the barrier control interfaces and the internal relays, the device provides 2 groups of the barrier control signals on the main user extended interface board, including 1 remaining open interface and 1 remaining closed interface.

  • Page 46: Alarm Input Wiring

    DS-K3B631TX Series Swing Barrier User Manual Figure 5-19 Alarm Output Wiring 1 Figure 5-20 Alarm Output Wiring 2 5.3.17 Alarm Input Wiring On the main user extended interface board, you can wire the fire alarm input interface. Figure 5-21 Remaining Open...
  • Page 47 DS-K3B631TX Series Swing Barrier User Manual Figure 5-22 Remaining Closed...

  • Page 48: Chapter 6 Device Settings

    DS-K3B631TX Series Swing Barrier User Manual Chapter 6 Device Settings After installation and wiring completed, the turnstile will study the open and closed position automatically. After the learning, the turnstile is in the normal mode. You can also set the turnstile to study mode, normal mode, and pair the keyfob, initialize the hardware via the main user extended interface board (middle/right pedestal).

  • Page 49: Pair Keyfob (Optional)

    DS-K3B631TX Series Swing Barrier User Manual 5. Set the No.1 switches of the 4-digit DIP Switch on the main user extended interface board by referring to the following figure. Figure 6-2 Normal Mode 6. Power on the device again. Note For details about the DIP switch value and meaning, see DIP Switch Description.

  • Page 50: Initialize Device

    DS-K3B631TX Series Swing Barrier User Manual Figure 6-3 Enable Keyfob Paring Mode 3. Power on the turnstile and it will enter the keyfob pairing mode. 4. Hold the Close button for more than 10 seconds. The keyfob's indicator of the will flash twice if the pairing is completed.
  • Page 51 DS-K3B631TX Series Swing Barrier User Manual Figure 6-4 Initialization Button Position 2. Power off and reboot the device. The device buzzer buzzes a long beep. 3. When the beep stopped, release the initialization button. Caution The initialization of the device will restore all the parameters to the default setting and all the...
  • Page 52 DS-K3B631TX Series Swing Barrier User Manual Note Make sure no persons are in the lane when powering on the device. The initialization is completed.

  • Page 53: Chapter 7 Activation

    DS-K3B631TX Series Swing Barrier User Manual Chapter 7 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 54 DS-K3B631TX Series Swing Barrier User Manual Figure 7-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least...

  • Page 55: Activate Via Web Browser

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.
  • Page 56 DS-K3B631TX Series Swing Barrier User Manual The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices.

  • Page 57: Activate Device Via Ivms-4200 Client Software

    DS-K3B631TX Series Swing Barrier User Manual 7.4 Activate Device via iVMS-4200 Client Software For some devices, you are required to create the password to activate them before they can be added to the iVMS-4200 software and work properly. Steps Note This function should be supported by the device.

  • Page 58: Chapter 8 Quick Operation

    DS-K3B631TX Series Swing Barrier User Manual Chapter 8 Quick Operation 8.1 Set Device Hotspot When the device hotspot is enabled, you can connect to the device via hotspot and activate remotely. Click to enable the device hotspot Name and Password.

  • Page 59: Activate Via Device

    DS-K3B631TX Series Swing Barrier User Manual Note You need to enter the hotspot password for mobile web log-in. 8.2 Activate via Device If the device is not activated, you can activate the device after it is powered on.
  • Page 60 DS-K3B631TX Series Swing Barrier User Manual On the Activate Device page, create a password and confirm the password. Tap Activate and the device will activated. Figure 8-1 Activation Page...

  • Page 61: Set Application Mode

    DS-K3B631TX Series Swing Barrier User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 62 DS-K3B631TX Series Swing Barrier User Manual Figure 8-2 Welcome Page 2. Tap OK to save. Note You can also change the settings in System Settings. ● If you install the device indoors near the window or the face recognition function is not ●...

  • Page 63: Set Network Parameters

    DS-K3B631TX Series Swing Barrier User Manual If you do not configure the application mode and tap Next, the system will select Indoor by ● default. If you activate the device via other tools remotely, the system will select Indoor as the ●...

  • Page 64: Privacy Settings

    DS-K3B631TX Series Swing Barrier User Manual Figure 8-3 Wired Network 2. Tap Next. 3. Optional: Tap Skip to skip network settings. 8.5 Privacy Settings Set the privacy parameters, including the picture uploading and storage.

  • Page 65: Keyfob Settings

    DS-K3B631TX Series Swing Barrier User Manual Select parameters according to your actual needs. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically. Save Pic. After Linked Capture (Save Pictures After Linked Capture) If you enable this function, you can save the picture captured by linked camera to the device.
  • Page 66 DS-K3B631TX Series Swing Barrier User Manual Figure 8-4 Keyfob Settings Set Working Mode as One-to-One or One-to-Many. Tap Next. Set keyfob name and serial No.. Tap Skip or Next.

  • Page 67: Set Administrator

    DS-K3B631TX Series Swing Barrier User Manual 8.7 Set Administrator After device activation, you can add an administrator to manage the device parameters. Before You Start Activate the device and select an application mode. Steps 1. Optional: Tap Skip to skip adding administrator if required.
  • Page 68 DS-K3B631TX Series Swing Barrier User Manual Figure 8-5 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 69 DS-K3B631TX Series Swing Barrier User Manual : Enter the card No. Click OK. 4. Click OK. You will enter the authentication page. Status Icon Description Device is armed/not armed. The device wired network is connected/not connected/connecting failed. 3G/4G is enabled.

  • Page 70: Chapter 9 Operation Via Web Browser

    DS-K3B631TX Series Swing Barrier User Manual Chapter 9 Operation via Web Browser 9.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .
  • Page 71 DS-K3B631TX Series Swing Barrier User Manual Click to view the device live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view.

  • Page 72: Person Management

    DS-K3B631TX Series Swing Barrier User Manual 9.3 Person Management Click Add to add the person's information, including the basic information, certificate, authentication and settings. Figure 9-2 Add Person Add Basic Information Click Person Management → Add to enter the Add Person page.

  • Page 73: Search Event

    DS-K3B631TX Series Swing Barrier User Manual Add the person's basic information, including the employee ID, the person's name, the gender, and person type. If you select Visitor as the person type, you can set the visit times. Click Save to save the settings.

  • Page 74: Device Management

    DS-K3B631TX Series Swing Barrier User Manual Figure 9-3 Search Event Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. The event types contain access control event and ID card event. If you choose to search for ID card event, you will not need to enter the employee ID, the name, or the card No.

  • Page 75: Configuration

    DS-K3B631TX Series Swing Barrier User Manual Steps 1. Click Device Management to enter the settings page. 2. You can view the Device Type, Card Reader ID, Activation Status, Registration Status, IP Address, Gateway, Subnet Mask, Communication Port, Serial No., MAC Address and PoE Port.

  • Page 76: Set Dst

    DS-K3B631TX Series Swing Barrier User Manual Figure 9-4 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval.

  • Page 77: Change Administrator's Password

    DS-K3B631TX Series Swing Barrier User Manual 9.6.4 Change Administrator's Password Steps 1. Click Configuration → User Management . 2. Click 3. Enter the old password and create a new password. 4. Confirm the new password. 5. Click OK. Caution The password strength of the device can be automatically checked. We highly recommend you...
  • Page 78 DS-K3B631TX Series Swing Barrier User Manual Figure 9-5 TCP/IP Settings Page Set the parameters and click Save to save the settings. Network Card Select a network to set. NIC Type Select a NIC type from the drop-down list. By default, it is Auto.

  • Page 79: Set Video And Audio Parameters

    DS-K3B631TX Series Swing Barrier User Manual Set Port Parameters Set the HTTP, HTTPS, HTTP Listening, and RTSP. Click Configuration → Network → Network Service → HTTP(S) . HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login.
  • Page 80 DS-K3B631TX Series Swing Barrier User Manual Figure 9-6 Video Settings Page Set the video channel, camera name, stream type, the video type, the resolution, the bitrate type, the video quality, the frame rate, the Max. bitrate, the video encoding, and I Frame Interval.

  • Page 81: Set Image Parameters

    DS-K3B631TX Series Swing Barrier User Manual Set Audio Parameters Click Configuration → Video/Audio → Audio . Select the audio channel. You can also drag the block to adjust the device output volume. Click to enable Voice Prompt. Click Save to save the settings after the configuration.

  • Page 82: Event Linkage

    DS-K3B631TX Series Swing Barrier User Manual Capture Interval You can select the capture interval according to your actual needs. 3. Click Restore Default Settings to restore the parameters to the default settings. 9.6.10 Event Linkage Set linked actions for events.
  • Page 83 DS-K3B631TX Series Swing Barrier User Manual Figure 9-7 Event Linkage 2. Set event source. - If you choose Linkage Type as Event Linkage, you need to select event types from the drop- down list. - If you choose Linkage Type as Card Linkage, you need to enter the card No. and select the...

  • Page 84: Access Control Settings

    DS-K3B631TX Series Swing Barrier User Manual - If you choose Linkage Type as Employee ID Linkage, you need to enter the employee ID and select the card reader. 3. Set linked action. Linked Buzzer Enable Linked Buzzer and select Start Buzzing or Stop Buzzing for the target event.
  • Page 85 DS-K3B631TX Series Swing Barrier User Manual Figure 9-8 Set Authentication Parameters Click Save to save the settings after the configuration. Terminal Choose Entrance or Exit for settings. Enable Authentication Device Enable the authentication function. Continuous Recognition Interval You can set the interval between 2 continuous recognition of a same person during the authentication.
  • Page 86 DS-K3B631TX Series Swing Barrier User Manual Enable to report alarm when the card reading attempts reach the set value. Communication with Controller Every When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically.
  • Page 87 DS-K3B631TX Series Swing Barrier User Manual You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions.
  • Page 88 DS-K3B631TX Series Swing Barrier User Manual 5. You can view the serial port type, connected device model and peripheral software version. 6. Click Save. Set Wiegand Parameters You can set the Wiegand transmission direction. Steps Note Some device models do not support this function. Refer to the actual products when configuration.

  • Page 89: Turnstile

    DS-K3B631TX Series Swing Barrier User Manual Steps 1. Set the device working mode. Figure 9-11 Working Mode Permission Free Mode The device will not verify the person's permission, but only the person's validity period. If the person is in the validity period, the barrier will open.
  • Page 90 DS-K3B631TX Series Swing Barrier User Manual Figure 9-12 Basic Parameters 2. View the Device Type, Device Model and Working Status. 3. Set Barrier Material, Lane Width, Barrier Opening Speed and Barrier Closing Speed. 4. Set the passing mode. - If you choose General Passing, you can select the barrier status for the entrance and exit from the drop-down list.
  • Page 91 DS-K3B631TX Series Swing Barrier User Manual Figure 9-13 keyfob 2. Set Working Mode as One-to-One or One-to-Many. 3. Add keyfob. 1) Click Add and the keyfob adding window will pop up. 2) Enter the Name and Serial No.. 3) Check to enable Remain Open Permission at your actual needs.
  • Page 92 DS-K3B631TX Series Swing Barrier User Manual 2. Set the entrance and exit inductive mode as Single Triggered or Triggered Simultaneously. 3. Set custom IR detector mode. Enable IR Emergency Mode If some IR beams do not work properly, you can shield those IR beams to restore the lane. But this action may hit person and cause injury.
  • Page 93 DS-K3B631TX Series Swing Barrier User Manual Steps 1. Click Configuration → Turnstile → Light to enter the page. Figure 9-16 Light Settings 2. Set side light. 1) Set Light Brightness as Auto or Fixed Brightness. If you choose Fixed Brightness, you can drag the block or enter the value to adjust the light brightness manually.

  • Page 94: Card Settings

    DS-K3B631TX Series Swing Barrier User Manual Other Settings Set other parameters. Steps 1. Click Configuration → Turnstile → Other Settings to enter the page. 2. Set Alarm Output Duration. Note The alarm output duration ranges from 0 s to 3599 s.
  • Page 95 DS-K3B631TX Series Swing Barrier User Manual Figure 9-17 Card Type Set the parameters and click Save. Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data.

  • Page 96: Set Privacy Parameters

    DS-K3B631TX Series Swing Barrier User Manual Enable CPU Card Enable CPU card and authenticating by presenting CPU card is available. CPU Card Read Content After enable the CPU card content reading function, the device can read the CPU card content.

  • Page 97: Set Biometric Parameters

    DS-K3B631TX Series Swing Barrier User Manual If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted.
  • Page 98 DS-K3B631TX Series Swing Barrier User Manual Figure 9-18 Smart Settings Page Click Save to save the settings after the configuration. Terminal Choose Entrance or Exit for settings. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode.
  • Page 99 DS-K3B631TX Series Swing Barrier User Manual Enable Face Recognition If enabling the function, the device will start face recognition. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not.

  • Page 100: Set Screen Display

    DS-K3B631TX Series Swing Barrier User Manual None The function is disabled. The device will not detect whether a person is wearing a face mask or not. Reminder of Wearing If the person do not wear the face mask when authenticating, the device will pop up a prompt and the door will open.

  • Page 101: Notice Publication

    DS-K3B631TX Series Swing Barrier User Manual 9.6.17 Notice Publication You can set the notice publication for the device. Click Configuration → Preference → Notice Publication . Theme Management Click Media Library Management → + to upload the picture from the local PC.
  • Page 102 DS-K3B631TX Series Swing Barrier User Manual Figure 9-19 Customize Audio Content 2. Select time schedule. 3. Enable the function. 4. Set the appellation. 5. Set the time period when authentication succeeded. 1) Click Add Time Duration. 2) Set the time duration.

  • Page 103: Upgrade And Maintenance

    DS-K3B631TX Series Swing Barrier User Manual Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content. 3) Set the audio content. If you choose TTS, you need to set the language and enter the prompt content of authentication success.

  • Page 104: Device Debugging

    DS-K3B631TX Series Swing Barrier User Manual Reboot Device Click Maintenance and Security → Maintenance → Restart . Click Restart to reboot the device. Upgrade Click Maintenance and Security → Maintenance → Upgrade . Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC.

  • Page 105: Component Status

    DS-K3B631TX Series Swing Barrier User Manual Enable SSH To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Print Log You can click Export to export log. 9.6.21 Component Status You can view the main lane and sub lane status.
  • Page 106 DS-K3B631TX Series Swing Barrier User Manual Sub Lane Status Figure 9-21 Sub Lane Status Device Component You can view the status of the access control board, lane control board, user extended interface board, light board, IR adaptor and camera. Peripheral You can view the status of the RS-485 card reader, RS-232 card receiver, USB card reader and tamper input.

  • Page 107: Log Query

    DS-K3B631TX Series Swing Barrier User Manual Others Figure 9-22 Other Status Passing Mode You can view the entrance and exit mode. IR Detector Status You can view the status of each pair of the 20 IR beam sensors. Input and Output Status You can view the status of the event input, alarm output and fire alarm.

  • Page 108: Certificate Management

    DS-K3B631TX Series Swing Barrier User Manual Set the major and minor type of the log type. Set the start time and end time for searching, and click Search. The results will be displayed below, which including the No., time, the major type the minor type, the channel No., the local/remote user information, the remote host IP, etc.
  • Page 109 DS-K3B631TX Series Swing Barrier User Manual Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Maintenance and Security → Security → Certificate Management . 2. Create an ID in the Import CA Certificate area.

  • Page 110: Chapter 10 Configure The Device Via The Mobile Browser

    DS-K3B631TX Series Swing Barrier User Manual Chapter 10 Configure the Device via the Mobile Browser 10.1 Login You can login via mobile browser. Note Make sure the device is activated. Enter the device IP address in the address bar of the mobile browser and press Enter to enter the login page.

  • Page 111: Configuration

    DS-K3B631TX Series Swing Barrier User Manual Figure 10-1 Shortcut Entry and Network Status You can tap to fast enter the basic settings page, user page, keyfob page, light page and network page. 10.3 Configuration 10.3.1 Turnstile Basic Parameters You can set the basic parameters of the turnstile.

  • Page 112: User Management

    DS-K3B631TX Series Swing Barrier User Manual Figure 10-2 Turnstile Basic Parameters Set Barrier Material, Lane Width, Barrier Opening Speed and Barrier Closing Speed. Set the regular passing mode for the entrance and exit. Tap Save. 10.3.2 User Management You can add, edit, delete, and search users via mobile Web browser.
  • Page 113 DS-K3B631TX Series Swing Barrier User Manual Steps 1. Tap User to enter the settings page. Figure 10-3 Add User...

  • Page 114: Keyfob Settings

    DS-K3B631TX Series Swing Barrier User Manual 2. Add user. 1) Tap 2) Set the following parameters. Employee ID Enter the employee ID. The Employee ID cannot be 0 or exceed 32 characters. It can be a combination of uppercase, lowercase letters and numbers.

  • Page 115: Light Settings

    DS-K3B631TX Series Swing Barrier User Manual Figure 10-4 Keyfob Settings Set Working Mode as One-to-One or One-to-Many. Tap Management to enter the page. Tap + to add keyfob. Set keyfob name, serial No. and remain open permission. 10.3.4 Light Settings...
  • Page 116 DS-K3B631TX Series Swing Barrier User Manual Side Light Figure 10-5 Side Light Settings Set Light Brightness as Auto or Fixed Brightness. If you choose Fixed Brightness, you can enter the value to adjust the light brightness manually. Set inductive, prohibited and Auth. passing light color.
  • Page 117 DS-K3B631TX Series Swing Barrier User Manual Barrier Light Figure 10-6 Barrier Light Settings Tap to enable Light on When on Standby at your actual needs and set the barrier light color.
  • Page 118 DS-K3B631TX Series Swing Barrier User Manual Welcome Light Figure 10-7 Welcome Light Settings Tap to enable Light on When on Standby at your actual needs and set the welcome light color.

  • Page 119: Network Settings

    DS-K3B631TX Series Swing Barrier User Manual 10.3.5 Network Settings You can set the wired network, device hotspot and port. Wired Network Set wired network. Tap Configuration → Communication Settings → Wired Network to enter the configuration page. Figure 10-8 Wired Network...
  • Page 120 DS-K3B631TX Series Swing Barrier User Manual DHCP If you disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU. If you enable the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway automatically.
  • Page 121 DS-K3B631TX Series Swing Barrier User Manual Figure 10-9 Device Hotspot Tap to Enable Device Hotspot. Set hotspot Name and Password. Click Save. Serial Port Configuration Set serial port. Tap Configuration → Communication Settings → Serial Port Configuration to enter the...

  • Page 122: Device Basic Settings

    DS-K3B631TX Series Swing Barrier User Manual Figure 10-10 Serial Port Configuration Set Serial Port Position as Entrance or Exit. Select the port No., and set Baud Rate, Data Bit, Stop Bit and Parity. Set the Peripheral Type as Card Receiver, QR Code Scanner or Disable.
  • Page 123 DS-K3B631TX Series Swing Barrier User Manual Tap Configuration → Basic Settings to enter the configuration page. Figure 10-11 Basic Configuration Language The language is set English by default. Voice Settings...

  • Page 124: Access Control Settings

    DS-K3B631TX Series Swing Barrier User Manual Tap to Enable Voice Prompt, select entrance or exit to set voice prompt and drag to set the volume. Time Settings Tap to select the time zone and the device time. Tap DST to enter the DST setting page. Set the DST start time, end time and bias time Sleep Set the device sleep time.
  • Page 125 DS-K3B631TX Series Swing Barrier User Manual Figure 10-12 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration.
  • Page 126 DS-K3B631TX Series Swing Barrier User Manual You can set the exit button as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions.
  • Page 127 DS-K3B631TX Series Swing Barrier User Manual Figure 10-13 Authentication Settings 2. Tap Save. Terminal Choose Entrance or Exit for settings. Enable Authentication Device Enable the authentication function. Authentication Select an authentication mode according to your actual needs from the drop-down list.
  • Page 128 DS-K3B631TX Series Swing Barrier User Manual Continuous Recognition Interval You can set the interval between 2 continuous recognition of a same person during the authentication. In the configured interval, Person A can only recognized once. If another person (Person B) has recognized during the interval, Person A can recognized again.
  • Page 129 DS-K3B631TX Series Swing Barrier User Manual Figure 10-14 Card Security Set the parameters and click Save. Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data.
  • Page 130 DS-K3B631TX Series Swing Barrier User Manual Sector Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available.
  • Page 131 DS-K3B631TX Series Swing Barrier User Manual Figure 10-15 Terminal Parameters Permission Free Mode The device will not verify the person's permission, but only the person's validity period. If the person is in the validity period, the barrier will open. You can enable Verify Credential Locally. After enabling the function, the device will only verify the person's permission without the schedule template, etc.

  • Page 132: Face Parameters Settings

    DS-K3B631TX Series Swing Barrier User Manual The device works normally and will verify the person's permission to open the barrier. 10.3.8 Face Parameters Settings Set face parameters. Face Parameters Settings Tap Configuration → Biometrics .
  • Page 133 DS-K3B631TX Series Swing Barrier User Manual Figure 10-16 Face Parameters Note The functions vary according to different models. Refers to the actual device for details. Set Face Parameters.
  • Page 134 DS-K3B631TX Series Swing Barrier User Manual Terminal Choose Entrance or Exit for settings. Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment.
  • Page 135 DS-K3B631TX Series Swing Barrier User Manual Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt. Face without Mask Detection After enabling the face without mask detection, the system will recognize the captured face with mask picture or not.

  • Page 136: View Device Information

    DS-K3B631TX Series Swing Barrier User Manual 10.3.9 View Device Information View the device name, language, model, serial No., QR code, version, etc. Tap Configuration → System Information to enter the configuration page. You can view the device name, language, model, serial No., version, number of channels, IO input and output number, local RS-485 number, MAC address and open source license.

  • Page 137: Chapter 11 Client Software Configuration

    DS-K3B631TX Series Swing Barrier User Manual Chapter 11 Client Software Configuration You can call the hotline to get the iVMS-4200 client software installation package. 11.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software.

  • Page 138: Device Management

    DS-K3B631TX Series Swing Barrier User Manual 11.2 Device Management The client supports managing access control devices and video intercom devices. Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations.
  • Page 139 DS-K3B631TX Series Swing Barrier User Manual Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 140: Reset Device Password

    DS-K3B631TX Series Swing Barrier User Manual 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column. Note For detailed description of the required fields, refer to the introductions in the template.

  • Page 141: Manage Added Devices

    DS-K3B631TX Series Swing Barrier User Manual All the online devices sharing the same subnet will be displayed in the list. 3. Select the device from the list and click on the Operation column. 4. Reset the device password. - Click Generate to pop up the QR Code window and click Download to save the QR code to your PC.

  • Page 142: Group Management

    DS-K3B631TX Series Swing Barrier User Manual View Online User Click to view the details of online user who access the device, including user name, user type, IP address and login time. Refresh Device Click to refresh and get the latest device information.

  • Page 143: Person Management

    DS-K3B631TX Series Swing Barrier User Manual 2. Click Device Management → Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc. 4. Click Import.

  • Page 144: Import And Export Person Identify Information

    DS-K3B631TX Series Swing Barrier User Manual 11.4.2 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC.
  • Page 145 DS-K3B631TX Series Swing Barrier User Manual 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face.

  • Page 146: Get Person Information From Access Control Device

    DS-K3B631TX Series Swing Barrier User Manual Before You Start Make sure you have added persons and their face pictures to an organization. ● Make sure you have enabled the Export Person Information function to display the Export ● button. See for details.

  • Page 147: Issue Cards To Persons In Batch

    DS-K3B631TX Series Swing Barrier User Manual Note If you select the enrollment station, you should click Login, and enter IP address, port No., user name and password of the device. 5. Select the Getting Mode. Note The getting mode varies according to different devices. The access control device supports getting the person information by employee ID.

  • Page 148: Set Card Issuing Parameters

    DS-K3B631TX Series Swing Barrier User Manual Steps 1. Enter Person module. 2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential → Card panel, click on the added card to set this card as lost card.

  • Page 149: Configure Schedule And Template

    DS-K3B631TX Series Swing Barrier User Manual Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E.

  • Page 150: Add Template

    DS-K3B631TX Series Swing Barrier User Manual 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Up to 8 time durations can be set to one holiday period.

  • Page 151: Set Access Group To Assign Access Authorization To Persons

    DS-K3B631TX Series Swing Barrier User Manual 1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar. Note Up to 8 time duration(s) can be set for each day in the week schedule.
  • Page 152 DS-K3B631TX Series Swing Barrier User Manual picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc). 1. Click Access Control → Authorization → Access Group to enter the Access Group interface.

  • Page 153: Configure Advanced Functions

    DS-K3B631TX Series Swing Barrier User Manual 3) Click Apply All to Devices or Apply Changes to Devices. Apply All to Devices This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device.

  • Page 154: Configure Device Parameters

    DS-K3B631TX Series Swing Barrier User Manual Note For the card related functions(the type of access control card/multi-factor authentication), only ● the card(s) with access group applied will be listed when adding cards. The advanced functions should be supported by the device.
  • Page 155 DS-K3B631TX Series Swing Barrier User Manual Display the card information when authenticating. Display Person Information Display the person information when authenticating. Overlay Person Info. on Picture Display the person information on the captured picture. Voice Prompt If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device.
  • Page 156 DS-K3B631TX Series Swing Barrier User Manual 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters. Note The displayed parameters may vary for different access control devices. ● Some of the following parameters are not listed in the Basic Information page, click More to ●...
  • Page 157 DS-K3B631TX Series Swing Barrier User Manual Note The duress code, super code, and dismiss code should be different. ● The duress code, super password, and the dismiss code should be different from the ● authentication password. The length of duress code, super password, and the dismiss code is according the device, ●...
  • Page 158 DS-K3B631TX Series Swing Barrier User Manual When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value.
  • Page 159 DS-K3B631TX Series Swing Barrier User Manual Set the matching security level when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Live Face Detection Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not.
  • Page 160 DS-K3B631TX Series Swing Barrier User Manual Alarm Output Active Time How long the alarm output will last after triggered. 4. Click OK. 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output. Configure Parameters for Lane Controller After adding the lane controller to the client, you can configure its parameters for passing through the lane.

  • Page 161: Configure Other Parameters

    DS-K3B631TX Series Swing Barrier User Manual Temperature Unit Select the temperature unit that displayed in the device status. 4. Click OK. 11.7.2 Configure Other Parameters After adding the access control device, you can set its parameters such as network parameters, capture parameters, RS-485 parameters, Wiegand parameters, etc.
  • Page 162 DS-K3B631TX Series Swing Barrier User Manual Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device. MCU Version View the device MCU version. 5. Click Save. Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode.

  • Page 163: Door/Elevator Control

    DS-K3B631TX Series Swing Barrier User Manual 3. Select an access control device in the device list and click Wiegand to enter the Wiegand Settings page. 4. Set the switch to on to enable the Wiegand function for the device. 5. Select the Wiegand channel No. and the communication mode from the drop-down list.

  • Page 164: Control Door Status

    DS-K3B631TX Series Swing Barrier User Manual 11.8.1 Control Door Status You can control the status for the door(s), including unlock door, locking door, remaining the door unlock, remaining the door locked, remain all unlocked, etc. Before You Start Add person and assign access authorization to designed person, and person will have the access ●...

  • Page 165: Check Real-Time Access Records

    DS-K3B631TX Series Swing Barrier User Manual All doors in the group will be closed and locked. No person can access the doors even if he/she has the authorized credentials, except the super users. Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client.
  • Page 166 DS-K3B631TX Series Swing Barrier User Manual 2. Optional: Select an access point group from the drop-down list in the upper-right corner to show the real time access records of the selected group. 3. Optional: Check the event type and event status.

  • Page 167: Appendix A. Tips When Collecting/Comparing Face Picture

    DS-K3B631TX Series Swing Barrier User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Expression Keep your expression naturally when collecting or comparing face pictures, just like the ● expression in the picture below.

  • Page 168: Appendix B. Dip Switch

    DS-K3B631TX Series Swing Barrier User Manual Appendix B. DIP Switch B.1 DIP Switch Description The DIP switch is on the main user extended interface board. No.1 to No 4 is from the low bit to the high bit. Figure B-1 DIP Switch When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.
  • Page 169 DS-K3B631TX Series Swing Barrier User Manual Device Mode Function Decimal Value DIP Switch Address Diagram Work Mode Normal Mode Study Mode Keyfob Paring Disable Keyfob Mode Paring Mode Enable Keyfob Paring Mode...

  • Page 170: Appendix C. Event And Alarm Type

    DS-K3B631TX Series Swing Barrier User Manual Appendix C. Event and Alarm Type Event Alarm Type Tailgating Visual and Audible Reverse Passing Visual and Audible Force Accessing None Climb over Barrier Visual and Audible Overstay Visual and Audible Passing Timeout None...

  • Page 171: Appendix D. Error Code Description

    DS-K3B631TX Series Swing Barrier User Manual Appendix D. Error Code Description The swing barrier will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason...
  • Page 172 DS-K3B631TX Series Swing Barrier User Manual Error Reason Code Error Reason Code Lower Second IR Beam Obstruction Triggered Lower Third IR Beam Triggered 19 Exceeding Studying Range Lower Fourth IR Beam Motor Exception Triggered...

  • Page 173: Appendix E. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 174 UD30186B...

This manual is also suitable for:

Ds-k3b631tx-lDs-k3b631tx-mDs-k3b631tx-r

Table of Contents