Set Biometric Parameters - HIKVISION DS-K3B961TX-L User Manual

3) Set the color of standby light, auth. completed light, auth. failed light and alarm light.
5. Click Save.
Other Settings
Set other parameters.
Steps
1. Click Configuration → Turnstile → Other Settings to enter the page.
2. Set Alarm Output Duration.
Note
The alarm output duration ranges from 0 s to 3599 s.
3. Set Temperature Unit.
4. Check to enable Do Not Open Barrier When Lane is Not Clear.
5. Drag the block or enter the value to adjust the lightboard brightness.
6. Set the alarm buzzer beeping duration, door closing delay time, max. intrusion duration,
overstaying duration and max. IR obstructed duration.
7. Check to enable Memory Mode at your actual needs.
Note
Multiple cards presenting for multiple person passing is allowable when enabling the memory
mode. When the passing person's number exceeds the card presenting number, or after the
latest person passing with no other person passing within the door open duration, the door will
close automatically.
8. Choose the control mode.
Soft Mode
The barrier will be closed after the person has passed through the barrier when there are
tailgating, forced accessing, etc.
Guard Mode
The barrier will be closed immediately when there are tailgating, forced accessing, etc.
9. Click to enable Free Passing Authentication at your actual needs.
10. Click Save.

7.8.21 Set Biometric Parameters

Set Basic Parameters
Click Configuration → Smart → Smart .
DS-K3B961TX Series Swing Barrier User Manual
70