Table of Contents
Advertisement
Before You Start
Make sure you have added persons and their face pictures to an organization.
●
Make sure you have enabled the Export Person Information function to display the Export
●
button. See for details.
Steps
1. Enter the Person module.
2. Optional: Select an organization in the list.
Note
All persons' face pictures will be exported if you do not select any organization.
3. Click Export on the top menu bar.
4. Enter the super user name and password for verification.
The Export panel is displayed.
5. Check Face as the content to export.
6. Click Export and set an encryption key to encrypt the exported file.
Note
The exported file is in ZIP format.
●
The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).
●
8.4.3 Get Person Information from Access Control Device
If the access control device has been configured with person information (including person details,
fingerprint, and issued card information), you can get the person information from the added
device and import them to the client for further operations.
Steps
Note
If the person name stored in the device is empty, the person name will be filled with the issued
●
card No. after importing to the client.
The gender of the persons will be Male by default.
●
If the card number or person ID (employee ID) stored on the device already exists in the client
●
database, the person with this card number or person ID will not be imported to the client.
1. Enter Person module.
2. Select an organization to import the persons.
3. Click Get from Device.
4. Select an added access control device or the enrollment station from the drop-down list.
DS-K3B961TX Series Swing Barrier User Manual
85
Advertisement
Table of Contents
