Writing The Serial Number Of The Unit - PIONEER DJ AlphaTheta CDJ-3000 Service Manual

5

8.3 WRITING THE SERIAL NUMBER OF THE UNIT

Writing the serial number can be performed from a PC that is connected with this unit via a USB B cable.
Preparations
1 Download the software for writing the serial number from Niis.
2 The compressed files decompress and save to PC.
The generated folder is below.
! Ini folder
! Log folder
! CDJ3000.SNW.exe
! hidcom.dll
Procedure
1 Turn on PC, and click "CDJ3000.SNW.exe" in the generated
folder. When the software is started, untick "Label print".
2 Connect the unit with a PC via a USB B cable.
TEMPO ±6/±10/±16/WIDE
3 While holding the
CUE/LOOP CALL
buttons pressed, press the u button to
c
turn the unit on.
(Start up the unit in Service mode.)
4 Push [Serial Number Write] button, display serial input dialog
(first time).
Enter serial number by handwork or barcode reader, and push
"Enter".
If enter by handwork, enter " ' " before serial number.
(If forgot, displayed error)
If enter by barcode reader, need to connect for PC in advance.
*Reference screen
5
6
5 Again display serial input dialog (second time), enter serial
number by handwork or barcode reader, and push "Enter"
like Step 4.
6 Dialog is displayed for the input of Destination Code, you need
to enter in accordance with following table.
Model Name
CDJ-3000/LSYXJ
CDJ-3000/AXJ
CDJ-3000/UXJCB
CDJ-3000-W/PXJ
CDJ-3000-W/AXJ
CDJ-3000-W/UXJCB
and
7 If update is finished correctly, display "OK" after a while.
This is completed about to write serial number for system.
You need to confirm by Service mode about to write correctly.
The unit is already starting in Service mode [Mode 1/10] VERSION
INFORMATION. Confirm that "DESTINATION" is "SY" (ex: LSYXJ
model) and "SERIAL No" is the same as the serial number of the
unit.
CDJ-3000
6
7
Input Destination Code
CDJ-3000/L
CDJ-3000/A
CDJ-3000/U
CDJ-3000-W/L
CDJ-3000-W/A
CDJ-3000-W/U
7
8
A
B
DESTINATION
SY
A
CU
SY
A
CU
C
D
SY
E
F
71
8