10
6.3
Examples for mounting
The following examples for installation show the various
possibilities to use the KMR.
S Monitoring flange joints
With this measurement set‐up, critical flange joints or the
setting of screws (max. property class 14.9) can be
monitored.
CAUTION
Please ensure when tightening the screws that the
connecting cable is not sheared off. Slightly lubricate the
supporting surface of screw head or nut to prevent the
transducer from turning during fastening of the screw.
You thus avoid shearing off the cable connection.
Fig. 6.1
Monitoring a screw preload
Washer
KMR
Washer
KMR
A2114-1.1_en/de