HBM KMR Mounting Instructions page 4

Warning sign, signal word
CAUTION
4
Residual dangers
The scope of performance and supply covers only part of
measurement technology. In addition, equipment
planners, installers and operators should plan, implement
and be responsible for the technical safety aspects of
force measurement technology in such a way as to
minimise the residual dangers. Prevailing regulations
must be complied with at all times. The residual dangers
connected with the force measurement technology must
be referred to explicitly.
Warning signs and danger symbols
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in or­
der to prevent accidents and damage to property.
Residual dangers are highlighted in these mounting
instructions with the following symbols:
Meaning
This marking warns of a potentially dangerous situ­
ation in which failure to comply with safety require­
ments can result in slight or moderate physical injury.
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the
relevant EC directives (the declaration of conformity is
available at http://www.hbm.com/HBMdoc).
Statutory marking requirements for waste disposal
National and local regulations regarding the protection of
the environment and recycling of raw materials require
old equipment to be separated from regular domestic
waste for disposal.
KMR
A2114-1.1_en/de