Intermec Sabre 1555 Programmer's Reference Manual page 73

Table 4-22 A/V Function Commands (continued)
LCD_XY
Function Name
This function sets the cursor to the position X, Y in the product display window
Description
X: is the horizontal position value [1 - 20]
Parameters Y: is the line number [1 - 2]
e.g., XY (10,1) = 0A\06\0A\01
IEC (IMC not activated)
Responses ACC (command accepted and started)
NAC (command not recognized or parameter is out of valid range)
LCD_Print
Function Name
This function inserts a string at the current LCD-XY cursor position in the product
Description
display window
Use ASCII characters to create the desired string for a single line. If the string sent goes
Parameters past the 20th character, only the characters that fit on the line of the display can be
displayed
IEC (IMC not activated)
Responses ACC (command accepted and started)
NAC (command not recognized)
LCD_Cursor
Function Name
This function activates/deactivates the type of cursor in the product display window
Description
OFF:
Parameters Normal cursor: \01
Flashing cursor: \02
IEC (IMC not activated)
Responses ACC (command accepted and started)
NAC (command not recognized)
Interactive Programming Mode
<TYPE> <CMD>: \0A\06 + Prms
<TYPE> <CMD>: \0A\07 + Prms
<TYPE> <CMD>: \0A\08 + Prms
\00
4
4-33