Intermec Sabre 1555 Programmer's Reference Manual page 100

Sabre 1555 RFID & Bar Code Reader Programmer's Reference Manual
Table 4-34 Bar Code Decoding Commands (continued)
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
4-60
Code Interleaved 2/5 Check CIP HR
Checked but Not Transmitted
None
ACC (command accepted)
NAC (command not recognized)
Code Interleaved 2/5 Check Not
Active
None
ACC (command accepted)
NAC (command not recognized)
Code Interleaved 2/5 Fixed Lengths
Choose 1, 2, or 3 fixed lengths provides the best performance and security if your
application has fixed lengths (minimum length = 2)
[2 - 50] hexadecimal, each parameter is separated by the value FNC4 (0x64)
e.g., two lengths 10, 6 = \0D\43\44\0A\64\06 (length values must be provided in
descending order)
ACC (command accepted)
NAC (command not recognized)
Code Interleaved 2/5 Minimum
Length
Choose a minimum length to optimize decoding performance and increase security,
select the same length as the minimum length in your application
[0; 2 - 50], hexadecimal, zero is special value to accepts any valid length (2 or more)
ACC (command accepted)
NAC (command not recognized)
<TYPE> <CMD>: \0D\43\42
<TYPE> <CMD>: \0D\43\43
<TYPE> <CMD>: \0D\43\44 + Prms
<TYPE> <CMD>: \0D\43\45 + Prms