Intermec Sabre 1555 Programmer's Reference Manual page 133

S
s
SAE
serial port
SMC
SRAM
start and stop
characters
system
T
transponder
TTL
TÜV
U
UL
UPC
V
V
Ver
second(s)
Society of Automotive Engineers
A link between a microcomputer and a peripheral device through which data is
transmitted.
Setup mode command
static random access memory
A special bar code character that provides the scanner with start and stop reading
instructions as well as a scanning direction indicator. The start character is normally at
the left end of a horizontally oriented symbol (bar code label). The stop character is
normally at the right end of a horizontally oriented symbol. For Code 39, the asterisk
(*) character is used. Depending on the software used, the users may not have to enter
the start and stop codes when they create their own bar code labels.
A reader, RF module, antenna, and tag, all described by their general application and
their interfaces with each other and any connected devices that are defined as being
outside the system.
small, self-contained device acting as an identifying tag
transistor-to-transistor logic
Technischer Ueberwachungsverein (Technical Control Board)
Underwriters Laboratories, Incorporated
Universal Product Code
volt(s)
version (software)
Acronyms and Glossary
A
A-9