Intermec Sabre 1555 Programmer's Reference Manual page 116

Sabre 1555 RFID & Bar Code Reader Programmer's Reference Manual
Table 4-36 Data Transmission Setting Commands (continued)
AIM Symbology Identifier Transmitted
Command Name
Activates AIM symbology identifier transmission for all symbologies. This identifier
character is sent after a preamble and before data to the host system.
Description e.g., format: "]A0" identifies standard Code 39 without check digit.
Refer to the official AIM documentation on symbology identifiers in "AIM (Automatic
Identification Manufacturer's) Identifier" on page 4-42 or EasySet for more information.
None
Parameters
ACC (command accepted)
Responses
NAC (command not recognized)
AIM Symbology Identifier Not
Command Name
Transmitted
Deactivates AIM symbology identifier transmission for all symbologies.
Description
Refer to the official AIM documentation on symbology identifiers or EasySet for more
information.
None
Parameters
ACC (command accepted)
Responses
NAC (command not recognized)
4-76
<TYPE> <CMD>: \0D\47\58
<TYPE> <CMD>: \0D\47\59