Intermec Sabre 1555 Programmer's Reference Manual page 102

Sabre 1555 RFID & Bar Code Reader Programmer's Reference Manual
Table 4-34 Bar Code Decoding Commands (continued)
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
4-62
Code Standard 2/5 Fixed Lengths
Choose 1, 2 or 3 fixed lengths provides the best performance and security if your
application has fixed lengths (minimum length = 3)
[3 - 50] hexadecimal each parameter is separated by the value FNC4 (0x64)
e.g., Two lengths 10, 6 = 0D\43\4B\0A\64\06 (length values must be provided in
descending order)
ACC (command accepted)
NAC (command not recognized)
Code Standard 2/5 Minimum Length
Choose a minimum length to optimize decoding performance and increase security,
select the same length as the minimum length in your application
[0; 3 - 50], hexadecimal, zero is a special value to accept any valid length (3 or more)
ACC (command accepted)
NAC (command not recognized)
Code 2/5 Matrix Minimum Length
Choose a minimum length to optimize decoding performance and increase security,
select the same length as the minimum length in your application
[0; 3 - 50], zero is a special value to accept any valid length (3 or more)
ACC (command accepted)
NAC (command not recognized)
Code Codabar Start/Stop Not
Transmitted
None
ACC (command accepted)
NAC (command not recognized)
Code Codabar Start/Stop a,b,c,d
None
ACC (command accepted)
NAC (command not recognized)
<TYPE> <CMD>: \0D\43\4B + Prms
<TYPE> <CMD>: \0D\43\4C + Prms
<TYPE> <CMD>: \0D\46\59 + Prms
<TYPE> <CMD>: \0D\43\4D
<TYPE> <CMD>: \0D\43\4E