Intermec Sabre 1555 Programmer's Reference Manual page 115

Table 4-36 Data Transmission Setting Commands (continued)
Custom Symbology Identifier Not
Command Name
Transmitted
This identifier character is not sent to the host system.
Description
None
Parameters
ACC (command accepted)
Responses
NAC (command not recognized)
Modify the Custom Symbology
Command Name
Identifier
By default a character identifier exists for each symbology. This command modifies the
Description
default character.
symbology
Codabar
Code 39
Code 93
Code 128/EAN 128
Parameters
Interleaved 2 of 5
Matrix 2 of 5
Standard 2 of 5
MSI Code
Plessey Code
Telepen
EAN 8
EAN 13
UPC A
UPC E
ACC (command accepted)
Responses
NAC (command not recognized)
\06 + "1 Character parameter" (see Appendix C) e.g., Identifier for UPC-E = "E":
\0D\45\59\09\25
Interactive Programming Mode
<TYPE> <CMD>: \0D\45\56
<TYPE> <CMD>: \0D\45\59 + Prms
Symbology Default Custom
indicator symbology_id
0x04 'D'
0x01 '*'
0x0D 'D'
0x0B 'D'
0x02 'I'
0x0E 'D'
0x03 'D'
0x0A 'D'
0x0C 'D'
0x0F '*'
0x07 "F', 'F'
0x06 'F'
0x08 'A'
0x09 'E'
4
4-75