Intermec Sabre 1555 Programmer's Reference Manual page 32

Sabre 1555 RFID & Bar Code Reader Programmer's Reference Manual
Table 3-1 Autonomous Mode Options (continued)
Setup Screen Display
Tag Filter Settings
Tag Read Settings
Tag Write Settings
LCD Settings
Communication
Reset
Data Buffer
Firmware Versions
Exit Setup
3-4
Setup Menu Option Display
o 1) @ 0 =
????????
o 2) @ 0 =
????????
o 3) @ 0 =
????????
o 4) @ 0 =
????????
Exit
1) @ 24 Length8
o 2) @ 0 Length0
o 3) @ 0 Length0
o 4) @ 0 Length0
Exit
Note: The tag read setting for
selection 1 @ 24 Length 8 is
activated.
o 1) @ 24 Length0
NO DATA
o 2) @ 24 Length0
NO DATA
o 3) @ 24 Length0
NO DATA
o 4) @ 24 Length0
NO DATA
Exit
Show tag ID: Yes/No
Data format: ASCII/hex
Contrast + 090%
Contrast – 090%
Exit
RS-232 (19200,8,N,2)
Exit
Factory defaults: No/Yes
Exit
[-----] 000%
Store in buffer: No/Yes
Send buffer
Clear buffer
Exit
*Sabre 1555PDT 2.15*
*RFID board 3.10*
*LCD board 1.4*
Exit
Save
No save
Return to setup
Description
Activates/deactivates from 1 to 4 filter masks
(criteria) to isolate desired tags.
Activates/deactivates from 1 to 4 read fields.
Activates/deactivates from 1 to 4 write fields.
Defines LCD screen options.
Displays the desired communication protocol.
Global reset of all parameter settings.
Data buffer stores tag or bar code ID data in
the Sabre 1555. Select enabling or disabling
data buffer, send data over serial port, and
clearing buffer.
Displays the firmware versions currently
loaded in the product.
Saves changes and quits Setup mode.