Intermec Sabre 1555 Programmer's Reference Manual page 110

Sabre 1555 RFID & Bar Code Reader Programmer's Reference Manual
Table 4-34 Bar Code Decoding Commands (continued)
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
Command Name
Description
Parameters
Responses
4-70
Code EAN 8 Transmitted as EAN 13
None
ACC (command accepted)
NAC (command not recognized)
Code 128 Minimum Length
Choose a minimum length to optimize decoding performance and increase security,
select the same length as the minimum length in your application
[0; 1 - 50], zero is a special value to accept any valid length (1 or more)
ACC (command accepted)
NAC (command not recognized)
Code EAN/128 FNC1 Separator
Character
Used as a separator when multiple identifiers and their fields are concatenated.
Default FNC1 character is GS function character (ASCII 29)
See Appendix D to convert the character
ACC (command accepted)
NAC (command not recognized)
Code Plessey Check Digit
Transmitted
None
ACC (command accepted)
NAC (command not recognized)
Code Plessey Check Digit Not
Transmitted
None
ACC (command accepted)
NAC (command not recognized).
<TYPE> <CMD>: \0D\44\51
<TYPE> <CMD>: \0D\44\55 + Prms
<TYPE> <CMD>: \0D\46\52 + Prms
<TYPE> <CMD>: \0D\44\56
<TYPE> <CMD>: \0D\44\57