UniCarriers FRSB14-8 Operation & Maintenance Manual page 86

REMOVING AND REINSTALLING THE REMOVING AND REINSTALLING THE
BATTERY BATTERY
WARNING WARNING
Never place yourself between th Never place yourself between
• •
the mast or the the mast or the
Make sure to remove and Make sure to remove and
• •
with the truck parked on a level surface and in with the truck parked on a level surface and in
an area with no obstacles in front. an area with no obstacles in front.
Keep the forks at a Keep the forks at a h
• •
sure the truck is unloaded. sure the truck is unloaded.
Make sure the key switch is Make sure the key switch is
• •
are lowered to the ground or floor surface are lowered to the ground or floor surface
and the battery connectors are disconnected and the battery connectors are disconnected
before inspecting the battery, adding battery before inspecting the battery, adding battery
electrolyte or water, or replacing the electrolyte or water, or replacing the
When returning the battery, make sure the When returning the battery, make sure the
• •
battery is securely housed in the case and the battery is securely housed in the case and the
battery cable is not twisted, kinked, or battery cable is not twisted, kinked, or
the battery case the battery case
REMOVING THE BATTERY REMOVING THE BATTERY
1) 1) Pull back the reach lever [1] to retract the mast fully Pull back the reach lever [1] to retract the mast
2) Step on the battery lock release pedal [2] fully, with 2) Step on the battery lock release pedal [2] fully, with
the mast the mast retracted fully. retracted fully.
3) Keeping the battery lock release pedal pressed fully, 3) Keeping the battery lock release pedal pressed fully,
push the reach lever forward. The battery will come push the reach lever forward. The battery will come
out as the mast advances. out as the mast advances.
REINSTALLING THE BATTERY REINSTALLING THE BATTERY
1) Keeping the battery lock release pedal [2] fully 1) Keeping the battery lock release pedal [2] fully
pressed, pull the reach lever [1] to retract the mast. pressed, pull the reach lever [1] to retract the mast.
The battery case will be returned to its original The battery case will be returned to its original
position by the mast movement. position by the mast movement.
2) When the battery case is returned back, the battery 2) When the battery case is returned back, the battery
cable may come off the cable guide or be raised from cable may come off the cable guide or be raised from
the cable guide. In that case, rst correct the position the cable guide. In that case, rst correct the position
of the cable and push in the battery. of the cable and push in the battery.
3) 3) Af Af te te r r ma ma ki ki ng ng
retracted, release the battery lock release pedal. retracted, release the battery lock release pedal.
NOTE NOTE
If the battery lock release pedal does not return fully If the battery lock release pedal does not return fully
when you release the pedal, step on the pedal again when you release the pedal, step on the pedal again
and pull the reach lever to retract the mast again. and pull the reach lever to retract the mast again.
the battery and e battery and
truck body. truck body.
reinstall the battery reinstall the battery
height of 10 to 30 cm eight of 10 to 30 cm
"OFF", the forks "OFF", the forks
or the truck body. or the truck body.
su su re re th th e e ma ma st st ha ha s s be be en en
https://www.forkliftpdfmanuals.com/
BATTERY CARE BATTERY CARE
2 2
and be and be
battery battery. .
caught in caught in
fully. .
co co mp mp le le te te ly ly
3-14 3-14
1 1
(Battery pulled out into view) (Battery pulled out into view)