UniCarriers FRSB14-8 Operation & Maintenance Manual page 101

19 19
BACK-UP BACK-UP
Place the direction shift switch in the reverse travel Place the direction shift switch in the reverse travel
position to check if the back-up buzzer sounds. position to check if the back-up buzzer sounds.
20 20
LIGHTS LIGHTS
Turn on the lighting switch to check if the work lights are Turn on the lighting switch to check if the work lights are
turned on and off properly. Check also that the lenses turned on and off properly. Check also that the lenses
are clean and intact. are clean and intact.
If the truck comes equipped with optional turn signals or If the truck comes equipped with optional turn signals or
headlights, check them too. headlights, check them too.
21 21
LOAD LOAD
Move the load handling levers (lift, tilt, reach and side- Move the load handling levers (lift, tilt, reach and side-
shift) through their full range twice or three times to shift) through their full range twice or three times to
check if the forks and mast operate smoothly without check if the forks and mast operate smoothly without
squeaking. squeaking.
Also check the levers for looseness. Also check the levers for looseness.
NOTE NOTE
WARMING UP CYLINDERS WARMING UP CYLINDERS
Before starting the day's work or your shift, warm up Before starting the day's work or your shift, warm up
the cylinders. This lubricates packings and seals in the cylinders. This lubricates packings and seals in
the cylinders to make them ready for operation. the cylinders to make them ready for operation.
Advance the mast fully and turn off the key switch before performing the following Advance the mast fully and turn off the key switch before performing the following
checks: checks:
WARNING WARNING
When performing When performing
• •
caution must be exercised to avoid getting caution must be exercised to avoid getting
caught in the truck parts, entanglement of the caught in the truck parts, entanglement of the
body in rotating parts, or falling. body in rotating parts, or falling.
W h e n c h e c k i n g t h e t r u c k w i t h t h e m a s t W h e n c h e c k i n g t h e t r u c k w i t h t h e m a s t
• •
advanced, put a pallet or something rigid advanced, put a pallet or something rigid
between the mast and the truck frame, so that between the mast and the truck frame, so that
you will not be caught in between. you will not be caught in between.
PREOPERA PREOPERATIONAL
BUZZER BUZZER
HANDLING HANDLING LEVERS LEVERS
the following the following
https://www.forkliftpdfmanuals.com/
TIONAL CHECKS CHECKS
1 1 : :
LOAD HANDLING LEVERS LOAD HANDLING LEVERS
checks, extra checks, extra
4-7 4-7
WORK WORK LIGHT LIGHT
1 1