UniCarriers FRSB14-8 Operation & Maintenance Manual page 48

INSTRUMENT PANEL INSTRUMENT PANEL
KEYPAD KEYPAD
S.P.E. BUTTON [13] S.P.E. BUTTON [13]
Every time the S.P.E. button is pressed, the operating Every time the S.P.E. button is pressed, the operating
power mode changes, with the letter S, P or E power mode changes, with the letter S, P or E
→ →
appearing (S appearing (S P P
operating power mode of the truck. operating power mode of the truck.
SCREEN SELECTION "MODE" BUTTON [14] SCREEN SELECTION "MODE" BUTTON [14]
Every time this button is pressed, the Every time this button is pressed, the
Screen Screen instrument panel screen changes: instrument panel screen changes:
selection selection Main screen Main screen
→ →
Hour meter screen Hour meter screen
If this button is pressed for more than If this button is pressed for more than
Date and Date and
3 seconds, the Date and Time screen 3 seconds, the Date and Time screen
time screen time screen
appears. appears.
LOW-SPEED TRAVEL (TURTLE) BUTTON [15] LOW-SPEED TRAVEL (TURTLE) BUTTON [15]
When you press the turtle mark button on the keypad, When you press the turtle mark button on the keypad,
the truck gets in the low-speed travel mode. To release the truck gets in the low-speed travel mode. To release
the low-speed travel mode, press the button again. the low-speed travel mode, press the button again.
Normal-speed Normal-speed
• •
When the When the turtle turtle
off, the low-speed (turtle) mark on the instrument off, the low-speed (turtle) mark on the instrument
panel disappears. panel disappears.
Low-speed Low-speed travel travel
• •
When the When the turtle turtle
on, the low-speed (turtle) mark appears on the on, the low-speed (turtle) mark appears on the
instrument panel. instrument panel.
+/- BUTTONS [16] +/- BUTTONS [16]
Change the date and time using the +/- buttons on the Change the date and time using the +/- buttons on the
keypad. keypad.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
→ → → →
E E S). Use this button to set the S). Use this button to set the
→ →
Power consumption screen Power consumption screen
→ →
Main screen Main screen
travel travel mode mode
mark mark button on button on the keypad the keypad
mode mode
mark mark button on button on the keypad the keypad
https://www.forkliftpdfmanuals.com/
is is turned turned
is is turned turned
2-4 2-4
13 13 14 14 15 15
16 16