UniCarriers FRSB14-8 Operation & Maintenance Manual page 53

ERROR SCREEN ERROR SCREEN
ERROR CODES ERROR CODES
If a failure occurs with the truck, the "wrench" icon If a failure occurs with the truck, the "wrench" icon
appears along with a 3-digit error code. If an error code appears along with a 3-digit error code. If an error code
appears, consult your appears, consult your
CONTROLLER OVERHEAT WARNING LIGHT CONTROLLER OVERHEAT WARNING LIGHT
The controller overheat icon blinks when the traveling The controller overheat icon blinks when the traveling
or load handling operation is too much to the truck, with or load handling operation is too much to the truck, with
the corresponding error code "203" indicated. It usually the corresponding error code "203" indicated. It usually
stays off. If the icon starts blinking, stop the operation stays off. If the icon starts blinking, stop the operation
immediately and wait until the light goes out. immediately and wait until the light goes out.
MOTOR OVERHEAT WARNING LIGHT MOTOR OVERHEAT WARNING LIGHT
The motor overheat icon blinks when the drive motor The motor overheat icon blinks when the drive motor
has overheated, with the corresponding error code "206" has overheated, with the corresponding error code "206"
indicated. indicated.
It usually stays off. If the icon starts blinking, stop the It usually stays off. If the icon starts blinking, stop the
operation immediately and wait until the light goes out. operation immediately and wait until the light goes out.
NOTE NOTE
If neglect of such warning lights will cause the truck If neglect of such warning lights will cause the truck
to stop to stop eventually eventually.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
local UniCarriers dealer. local UniCarriers dealer.
.
https://www.forkliftpdfmanuals.com/
2-9 2-9