UniCarriers FRSB14-8 Operation & Maintenance Manual page 55

SETTING AND CHANGING THE SETTING AND CHANGING THE
On the Main screen, press the "Mode" button [8] in the On the Main screen, press the "Mode" button [8] in the
center of the key pad and hold it down for 3 seconds to center of the key pad and hold it down for 3 seconds to
display the Date and Time screen. display the Date and Time screen.
You can change any item when it is underlined [7]. You can change any item when it is underlined [7].
The underline [7] shifts one The underline [7] shifts one
• •
the "Mode" button [8] is pressed. the "Mode" button [8] is pressed.
• •
If the "Mode" If the "Mode"
is located under the time format [6] item, the change will is located under the time format [6] item, the change will
be stored in memory and the display will return to the be stored in memory and the display will return to the
Main screen. Main screen.
An underlined [7] number can An underlined [7] number can
• •
decreased using the + and - buttons. decreased using the + and - buttons.
For For example, example,
be shown as follows: be shown as follows:
→ →
08 / 10 / 15 / 22 / 34 / 12 08 / 10 / 15 / 22 / 34 / 12
If the low-speed travel If the low-speed travel
• •
display will return to the Main screen. Then, you can display will return to the Main screen. Then, you can
start all over again. start all over again.
Even when the Even when the
• •
current time in the 24-hour format. current time in the 24-hour format.
The day The day of the of the
• •
CANCELING A PASSWORD CANCELING A PASSWORD
If the truck is password-protected, the PASSWORD screen If the truck is password-protected, the PASSWORD screen
will appear when the key switch is turned to the "ON" position. will appear when the key switch is turned to the "ON" position.
Enter the 4-digit password on the PASSWORD screen. Enter the 4-digit password on the PASSWORD screen.
The truck won't operate unless the correct password is The truck won't operate unless the correct password is
entered. entered.
Every time the Every time the
• •
that can be changed shifts one digit to the right. that can be changed shifts one digit to the right.
The valu The valu
• •
decreased using the + and - buttons [2]. decreased using the + and - buttons [2].
After entering the After entering the
• •
and hold it down for 3 seconds to conrm the entry. If and hold it down for 3 seconds to conrm the entry. If
the password is accepted, the Main screen will appear the password is accepted, the Main screen will appear
and you will be able to operate the truck. and you will be able to operate the truck.
If the password is wrong, the ERROR screen appears If the password is wrong, the ERROR screen appears
and then the PASSWORD screen will be displayed again. and then the PASSWORD screen will be displayed again.
The password will be The password will be
• •
key switch is key switch is
If the If the key switch key switch
2 hours after the key switch is turned "OFF", the 2 hours after the key switch is turned "OFF", the
instrument panel will be displayed immediately on the instrument panel will be displayed immediately on the
Main screen, bypassing the PASSWORD screen, and Main screen, bypassing the PASSWORD screen, and
you will be able to operate the truck. you will be able to operate the truck.
If two If two hours hours
"OFF", you will need to enter the password again. "OFF", you will need to enter the password again.
NOTE NOTE
If you want a password protection system for the truck, If you want a password protection system for the truck,
• •
contact your local UniCarriers dealer. Your UniCarriers contact your local UniCarriers dealer. Your UniCarriers
dealer will set the dealer will set the
• • Two Two different passwords can different passwords can
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
digit to the right every digit to the right every
button [8] is pressed button [8] is pressed when the underline when the underline
PM10:34, PM10:34, (WED) (WED) October October
(turtle) button is pressed, the (turtle) button is pressed, the
12-hour format is 12-hour format is
week will be week will be added automatically. added automatically.
"Mode" button [1] "Mode" button [1] is pressed, the digit is pressed, the digit
e of e of a digit (0 - a digit (0 - 9) can be 9) can be
password, press the password, press the
remembered for 2 remembered for 2
turned "OFF". turned "OFF".
is turned is turned to to the "ON" the "ON"
have have passed passed after after th the key e key
passwords for the system. passwords for the system.
be used. be used.
https://www.forkliftpdfmanuals.com/
DATE AND TIME DA TE AND TIME
time time
[7] [7]
be increased and be increased and
15, 15, 2008 2008 can can
selected, enter the selected, enter the
incr incr ease ease d or d or
"Mode" button "Mode" button [1] [1]
hours after the hours after the
position within position within
switch is switch is turned turned
2-11 2-11
4. 4.
5. 5.
6. 6.
7. 7.
8. 8.
9. 9.
1. 1. Y Y ear ear ( (right-mo right-most st 2 2
digits) digits)
10. 1 0.
2. Month 2. Month
11. 1 1.
3. 3. Date Date
PASSWORD INPUT PA SSWORD INPUT SCREEN SCREEN
1. 1.
2. 2.
PASSWORD ERROR SCREEN PASSWORD ERROR SCREEN
Current Current time time (hours) (hours)
Current Current time time (mins) (mins)
Time Time format: format: 12 12 or or
24 24
(12-hour (12-hour format format or or
24-hour format) 24-hour format)
Underline Underline
"Mode" "Mode" button button
Low-speed Low-speed travel travel
(turtle) button (turtle) button
+ + button button
- - button button
"Mode" "Mode" button button
+ + and and - - buttons buttons