UniCarriers FRSB14-8 Operation & Maintenance Manual page 60

ACCELERATOR PEDAL [1] ACCELERATOR PEDAL [1]
You can move the truck by pressing the accelerator You can move the truck by pressing the accelerator
pedal while the direction shift switch is in forward or pedal while the direction shift switch is in forward or
reverse, and the foot switch [3] is depressed. reverse, and the foot switch [3] is depressed.
The traveling speed can be controlled smoothly by The traveling speed can be controlled smoothly by
varying the amount of pressure on the accelerator varying the amount of pressure on the accelerator
pedal. The traveling speed is displayed as a direct pedal. The traveling speed is displayed as a direct
numeric readout on the instrument panel. numeric readout on the instrument panel.
BRAKE PEDAL [2] BRAKE PEDAL [2]
WARNING WARNING
Avoid hard braking. You might be thrown out of Avoid hard braking. You might be thrown out of
the truck by the sudden stop or the load the truck by the sudden stop or the load
off the forks. Abusing the brakes by hard braking off the forks. Abusing the brakes by hard braking
will cause shorten the life of the electromagnetic will cause shorten the life of the electromagnetic
brake system. brake system.
The brake is applied by depressing the brake pedal. The The brake is applied by depressing the brake pedal. The
braking force can be controlled by varying the amount of braking force can be controlled by varying the amount of
pressure on the brake pedal. When the brake pedal is pressure on the brake pedal. When the brake pedal is
pressed down all the pressed down all the
applied and also the drive power circuit is disconnected. applied and also the drive power circuit is disconnected.
The brake pedal is only operable when the key switch is The brake pedal is only operable when the key switch is
in the ON position. in the ON position.
REGENERA REGENERATIVE BRAKING TIVE BRAKING
Regenerative braking is put into effect whenever Regenerative braking is put into effect whenever
you reverse the direction shift switch or release the you reverse the direction shift switch or release the
accelerator pedal. accelerator pedal.
When the accelerator pedal is released When the accelerator pedal is released
Regenerative braking (electronic braking) is in effect Regenerative braking (electronic braking) is in effect
when the accelerator pedal is released while the reach when the accelerator pedal is released while the reach
truck is traveling. truck is traveling.
During switchback operations During switchback operations
Regenerative braking (electronic braking) occurs during Regenerative braking (electronic braking) occurs during
switchback operations or when the direction shift switchback operations or when the direction shift
switch is reversed. This braking force can be adjusted switch is reversed. This braking force can be adjusted
by varying the amount of pressure on the accelerator by varying the amount of pressure on the accelerator
pedal. pedal.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
might fall might fall
way, the maximum braking force way , the maximum braking force
(ELECTRONIC BRAKING) (ELECTRONIC BRAKING)
https://www.forkliftpdfmanuals.com/
3 3
is is
2-16 2-16
2 2
1 1