UniCarriers FRSB14-8 Operation & Maintenance Manual page 70

FORK POSITIONING LASER UNIT (OPTION) FORK POSITIONING LASER UNIT (OPTION)
A fork A fork positioning positioning
It emits a visible laser beam to help the operator check It emits a visible laser beam to help the operator check
the fork height by looking at the meter panel to make it the fork height by looking at the meter panel to make it
easy to insert the forks into the openings in a pallet. easy to insert the forks into the openings in a pallet.
OPERATION OPERATION
Push the laser switch [2] forward to the "ON" position Push the laser switch [2] forward to the "ON" position
• •
and tilt the forks until they are horizontal and a laser and tilt the forks until they are horizontal and a laser
beam will be visible. The "Forks are level" icon [1] is beam will be visible. The "Forks are level" icon [1] is
displayed on the meter panel. displayed on the meter panel.
The "Forks are level" icon [1] can be found on the The "Forks are level" icon [1] can be found on the
• •
Main screen and on the Fuel consumption indicator Main screen and on the Fuel consumption indicator
screen. screen.
NOTE NOTE
Remember that the forks may not be level even if the Remember that the forks may not be level even if the
"Forks are level" icon [1] is lit when there is a heavy "Forks are level" icon [1] is lit when there is a heavy
load on the forks, because the forks may bend to load on the forks, because the forks may bend to
some extent. some extent.
PRECAUTIONS WHEN USING THE FORK PRECAUTIONS WHEN USING THE FORK
POSITIONING LASER UNIT POSITIONING LASER UNIT
The fork positioning laser unit emits a laser beam. Make The fork positioning laser unit emits a laser beam. Make
sure to observe the following cautions when using the sure to observe the following cautions when using the
unit to protect yourself and unit to protect yourself and
WARNING WARNING
Do not Do not look directly at look directly at
• •
a reflected laser beam in a mirror; otherwise a reflected laser beam in a mirror; otherwise
you may damage your eyes. If you accidentally you may damage your eyes. If you accidentally
look at the laser beam and experience any look at the laser beam and experience any
problem with your vision or feel discomfort in problem with your vision or feel discomfort in
your eyes, seek your eyes, seek
Let fellow workers know about Let fellow workers know about
• •
the laser unit and make sure they do not look the laser unit and make sure they do not look
directly at the laser beam. directly at the laser beam.
Verify that Verify that the fork positioning laser unit is the fork positioning laser unit is
• •
functioning properly before starting the day's functioning properly before starting the day's
work, or before each shift. If it is not working work, or before each shift. If it is not working
correctly correctly, contact your , contact your
Do not try Do not try to disassemble or modify the to disassemble or modify the
• •
positioning laser unit. You may cause an positioning laser unit. You may cause an
accident. accident.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
laser laser unit unit is is installed installed on on
your fellow workers. your fellow workers.
the laser light the laser light
medical attention immediately. medical attention immediately.
the hazard of the hazard of
local UniCarriers local UniCarriers
https://www.forkliftpdfmanuals.com/
the the carriage. carriage.
1. 1. "Forks "Forks
source or source or
dealer. dealer.
fork fork
2-26 2-26
2 2
are are level" level" icon icon 2. 2. Laser Laser
Laser beam caution decal Laser beam caution decal
IEC 60825-1 : 2001 IEC 60825-1 : 2001
A laser beam is emitted A laser beam is emitted
switch switch
from here. from here.