UniCarriers FRSB14-8 Operation & Maintenance Manual page 41

2. 2. Precautions Precautions
the battery the battery
Never place yourself between Never place yourself between
• •
body. body.
Make sure to Make sure to
• •
truck parked on a level surface and in an area with no truck parked on a level surface and in an area with no
obstacles in front. obstacles in front.
Keep the forks at a height Keep the forks at a height
• •
truck is unloaded. truck is unloaded.
Make sure the Make sure the
• •
the ground or floor surface and the battery connectors are the ground or floor surface and the battery connectors are
disconnected before inspecting the battery, adding battery disconnected before inspecting the battery, adding battery
electrolyte or water, or replacing electrolyte or water, or replacing
When returning When returning
• •
housed securely in the battery case and that the battery cable housed securely in the battery case and that the battery cable
is not twisted, kinked or caught in the battery case or the truck is not twisted, kinked or caught in the battery case or the truck
body. body.
Removing and returning battery back Removing and returning battery back
Pulling the Pulling the
• •
1. 1. Retract the mast fu Retract the mast
release pedal fully. release pedal fully.
2. 2. With the battery lock release pedal pressed, push the With the battery lock release pedal pressed, push the
reach lever. The battery will come out as the mast reach lever. The battery will come out as the mast
advances. advances.
Putting t Putting the bat he
• •
1. 1. Press the battery lock release pedal Press the battery lock release pedal fully
reach lever to retract the mast fully. The battery case will reach lever to retract the mast fully. The battery case will
be returned to its original position by the mast movement. be returned to its original position by the mast movement.
2. When the battery is returned back, the battery cable 2. When the battery is returned back, the battery cable
might be twisted, kinked or caught in the battery case or might be twisted, kinked or caught in the battery case or
the truck body. If this happens, put the battery cable in its the truck body. If this happens, put the battery cable in its
proper place and then put the battery case back in place. proper place and then put the battery case back in place.
3. 3. Make sure Make sure
Battery inspection and adding electrolyte or water should be Battery inspection and adding electrolyte or water should be
performed with the battery case pulled out and the battery performed with the battery case pulled out and the battery
connectors disconnected. connectors disconnected.
5. 5. Caution Caution
CAUTION TO BE TAKEN WHEN USING SIDE SHIFTER CAUTION TO BE TAKEN WHEN USING SIDE SHIFTER
* Make sure the center of the load is aligned with the center of the * Make sure the center of the load is aligned with the center of the
truck before operating hydraulic controls or traveling with load. truck before operating hydraulic controls or traveling with load.
* Do not operate side shifter with the forks raised high (150 cm or * Do not operate side shifter with the forks raised high (150 cm or
higher), excluding when the load can be stabilized as it is over the higher), excluding when the load can be stabilized as it is over the
shelf. shelf.
* * Do not operate side shifter during trav Do not operate side shifter during
* * Make sure the bottom of forks is clear of ground or shelf surface. Make sure the bottom of forks is clear of ground or shelf surface.
* Do not use side shifter for purposes other than specified. Do not * Do not use side shifter for purposes other than specified. Do not
shove loads with side shove loads with side
while while removing removing
WARNING WARNING
the battery and the battery and
remove and return remove and return the battery back the battery back
of 10 to 30 cm and of 10 to 30 cm and
key switch is "OFF", key switch is "OFF", the forks are the forks are
the battery. the battery.
the battery the battery back, make sur back, make sure that the
battery battery o out of ut of the tr the truck uck
fully backward and press the lly backward and press the
battery ba tery back in ck in place place
fully, and then pull the
the mast is the mast is fully retracted. fully retracted.
to be to be taken taken when when using using
WARNING WARNING
traveling. Do not jerk side shifter eling. Do not jerk side
shifter. shifter.
https://www.forkliftpdfmanuals.com/
CAUTION PLATES CAUTION PLATES
and and returning returning
mast or mast or truck truck
with the with the
be sure the be sure the
lowered to lowered to
e that the battery is battery is
battery lock battery lock
, and then pull the
27E49-12301 27E49-12301
the the side-shifter side-shifter
shifter. .
61F16-12701 61F16-12701
1-37 1-37
3. 3. Precautions Precautions while while
truck truck
WARNING WARNING
Keep arms, legs, and hands inside the Keep arms, legs, and hands inside the
operator's compartment while traveling or operator's compartment while traveling or
load handling; otherwise there is danger load handling; otherwise there is danger
of being injured due to entanglement and of being injured due to entanglement and
other types of accidents. other types of accidents.
4. 4. How How to to use use the the load load
CAUTION CAUTION
Load meter can operate in Load meter can operate in
the range of free-lifting. the range of free-lifting.
6. 6. Do not Do not put put you your hand r hand
the mast the mast
7. 7. Do Do not not
under raised forks under raised forks
operating operating the the
27E49-12401 27E49-12401
meter meter
57B06-A2711 57B06-A2711
or or foo foot on t on
stand stand or or walk walk