Truck Body - UniCarriers FRSB14-8 Operation & Maintenance Manual

TRUCK BODY

TRUCK BODY
OPERATOR'S SEAT [1] OPERATOR'S SEAT [1]
WARNING WARNING
Adjust the seat to provide easy access to all the Adjust the seat to provide easy access to all the
controls before the day's work or before each controls before the day's work or before each
shift and make sure the seat is locked in the shift and make sure the seat is locked in the
desired position. desired position.
The operator's seat is a suspension seat which can be The operator's seat is a suspension seat which can be
adjusted to the driver's weight. adjusted to the driver's weight.
The position and backrest angle can also be adjusted to The position and backrest angle can also be adjusted to
the driver's physique. the driver's physique.
SUSPENSION ADJUSTMENT KNOB [3] SUSPENSION ADJUSTMENT KNOB [3]
The suspension can be adjusted within an operator The suspension can be adjusted within an operator
range from 45 to 170 kg, in the following manner: range from 45 to 170 kg, in the following manner:
Sit in the seat, pull out the knob [3] and move it up or Sit in the seat, pull out the knob [3] and move it up or
down so that the arrow is in the clear middle area of the down so that the arrow is in the clear middle area of the
viewing window [5]. viewing window [5].
FORE/AFT ADJUSTMENT LEVER [4] FORE/AFT ADJUSTMENT LEVER [4]
BACK RECLINE ADJUSTMENT LEVER [2] BACK RECLINE ADJUSTMENT LEVER [2]
Pull up the fore/aft adjustment lever and adjust the Pull up the fore/aft adjustment lever and adjust the
position of the seat forward or back within the range of position of the seat forward or back within the range of
165 mm. 165 mm.
Pull up the back recline adjustment lever and adjust the Pull up the back recline adjustment lever and adjust the
backrest angle to suit yourself. backrest angle to suit yourself.
SEAT BELT [6] SEAT BELT [6]
WARNING WARNING
Be sure to fasten the seat belt before starting Be sure to fasten the seat belt before starting
the truck; otherwise, if the truck turns over, the the truck; otherwise, if the truck turns over, the
operator could be thrown out and, in the worst operator could be thrown out and, in the worst
case, the operator could be crushed by the case, the operator could be crushed by the
Pull out the connector [7] on the left side and insert it Pull out the connector [7] on the left side and insert it
into the receptacle [8] on the right side until it clicks into into the receptacle [8] on the right side until it clicks into
place. place.
To unfasten the seat belt, press the red button (PRESS) To unfasten the seat belt, press the red button (PRESS)
on the receptacle unit [8], and the belt will automatically on the receptacle unit [8], and the belt will automatically
wind up into the seat. wind up into the seat.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
truck. truck.
2-18 2-18
https://www.forkliftpdfmanuals.com/
3 3
4 4
5 5
8 8
1 1
2 2
3 3
6 6
7 7