Inspection - UniCarriers FRSB14-8 Operation & Maintenance Manual

■ ■
ALWA ALW A YS YS I INSPECT NSPECT
OPERATING OPERATING
The operator should always inspect the truck before The operator should always inspect the truck before
each work shift to ensure that all essential safety each work shift to ensure that all essential safety
features are working. Any abnormality must be features are working. Any abnormality must be
reported to the supervisor, who is responsible for reported to the supervisor, who is responsible for
correcting it. correcting it.
■ ■
PERIODIC INSPECTIONS ARE PERIODIC INSPECTIONS ARE
MANDATORY MANDATORY
Monthly and annual inspections must be performed Monthly and annual inspections must be performed
thoroughly, and any abnormality promptly repaired. thoroughly, and any abnormality promptly repaired.
Only a certied expert who has the advanced skills Only a certied expert who has the advanced skills
and equipment is allowed to conduct inspections. and equipment is allowed to conduct inspections.
■ ■ REPLACE SAFE REPLACE SAFETY PARTS REGULARL
Names of the safety parts Names of the safety parts
Load handling system Load handling system
hydraulic hose hydraulic hose
L L i i f f t t c c h h a a i i n n
E E l l e e c c t t r r o o m m a a g g n n e e t t i i c c
Certain critical parts must be replaced at regular Certain critical parts must be replaced at regular
intervals. Since it is difcult to detect wear on these intervals. Since it is difcult to detect wear on these
parts by visual inspection, they must be replaced parts by visual inspection, they must be replaced
at the specied intervals, because a failure would at the specied intervals, because a failure would
result in a falling load or runaway truck. result in a falling load or runaway truck.
FOR OPERATORS AND SUPERVISORS FOR OPERATORS AND SUPERVISORS
BEFORE BEFORE
TY PARTS REGULARLY
Recommended Recommended
replacement interval replacement interval
(year) (year)
1 – 2 1 – 2
2 2 – – 4 4
b b r r a a k k e e 9 9 – – 1 1 0 0
https://www.forkliftpdfmanuals.com/

INSPECTION

INSPECTION
■ ■
NEVER USE AN UN-MAINTAINED NEVER USE AN UN-MAINTAINED
TRUCK TRUCK
DO NOT DO NOT
OPERATE OPERATE
A A truck truck that that has has
operated. Hang a sign in the control area that says operated. Hang a sign in the control area that says
DO NOT OPERATE and remove the key, to make DO NOT OPERATE and remove the key, to make
sure no one uses it. Then report the problem to the sure no one uses it. Then report the problem to the
supervisor and wait for repairs to be completed. supervisor and wait for repairs to be completed.
■ ■
DESIGNATE A REPAIR AND DESIGNATE A REPAIR AND
SUPERVISOR SUPERVISOR
Y
Repairs and the mounting and dismounting of Repairs and the mounting and dismounting of
attachments must be performed under the direction attachments must be performed under the direction
of a designated supervisor. The body and major of a designated supervisor. The body and major
parts of the lift truck are quite heavy and under very parts of the lift truck are quite heavy and under very
high pressure. Repair or assembly work undertaken high pressure. Repair or assembly work undertaken
without careful and thorough preparation can lead without careful and thorough preparation can lead
to serious to serious injury injury. .
1-12 1-12
failed faile d an an inspe inspection ction must must
ASSEMBLY ASSEMBLY
1. Preparation 1. Preparation
2. Removal 2. Removal
3. Disassembly 3. Disassembly
4. 4.
not not be be