UniCarriers FRSB14-8 Operation & Maintenance Manual page 64

OVERHEAD GUARD [1] OVERHEAD GUARD [1]
WARNING WARNING
The overhea The overhea
• •
device which protects the operator from falling device which protects the operator from falling
objects. objects.
Make sure Make sure it is it is
• •
Do Do not not use th use
removed or modied; otherwise it might cause removed or modied; otherwise it might cause
a serious accident. a serious accident.
FORK STOPPERS [2] FORK STOPPERS [2]
CAUTION CAUTION
The forks should be The forks should be
• •
truck centerline, and the fork stoppers should truck centerline, and the fork stoppers should
always be set. always be set.
When adjusting fork spread, hold When adjusting fork spread, hold
• •
backrest and push the forks with your foot. Do backrest and push the forks with your foot. Do
not use your hand. not use your hand.
The forks are secured with the fork stoppers. Pull the The forks are secured with the fork stoppers. Pull the
fork stoppers up a little bit and turn them 90°. Then fork stoppers up a little bit and turn them 90°. Then
adjust the fork spread using your feet to suit the size of adjust the fork spread using your feet to suit the size of
the load you are going to handle. the load you are going to handle.
Then adjust the fork spacing in five stages laterally Then adjust the fork spacing in five stages laterally
according to the size of according to the size of
FORK LOCKING BOLT [3] FORK LOCKING BOLT [3]
CAUTION CAUTION
Do not remove the fork locking bolt except in the Do not remove the fork locking bolt except in the
following situations; otherwise the forks might following situations; otherwise the forks might
disengage from the carriage, causing personal disengage from the carriage, causing personal
injury. injury.
When it When it is necessary to is necessary to
• •
When there is some reason to When there is some reason to
• •
and left forks together in and left forks together in
The fork prong can come off the carriage when is The fork prong can come off the carriage when is
moved to the center. This bolt prevents the fork from moved to the center. This bolt prevents the fork from
being used in the being used in the
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
d d guar guar d d is an is an impor impor
securely installed. securely installed.
the tru e truck with ck with the the overhead overhead
set symmetrically to the set symmetrically to the
the load you are the load you are going to carry. going to carry.
remove the remove the
bring the right bring the right
the center. the center.
center. center.
https://www.forkliftpdfmanuals.com/
tant safety tant safety
guard guard
the load the load
forks. forks.
2-20 2-20
1 1
2 2
3 3