UniCarriers FRSB14-8 Operation & Maintenance Manual page 54

POWER CONSUMPTION SCREEN POWER CONSUMPTION SCREEN
On the Main screen, press the "Mode" button [4] at the On the Main screen, press the "Mode" button [4] at the
center of the keypad to display the power consumption center of the keypad to display the power consumption
screen. screen.
The power The power consump consump
• •
consumption per hour. consumption per hour.
• •
The remaining battery The remaining battery
of time the truck can operate in the future without of time the truck can operate in the future without
recharging, estimated by calculating from the average recharging, estimated by calculating from the average
operating rate of the operating rate of the
The readings of The readings of
• •
remaining battery time [3] are updated every 6 remaining battery time [3] are updated every 6
minutes. minutes.
NOTE NOTE
The power consumption The power consumption
• •
time should be used as a rough guide, because time should be used as a rough guide, because
they are roughly calculated from the reading of the they are roughly calculated from the reading of the
battery discharge battery discharge
The battery capacity used for the basis of The battery capacity used for the basis of
• •
calculation is factory set. calculation is factory set.
If If the the batt batt ery ery
capacity is different from the factory setting, consult capacity is different from the factory setting, consult
your local UniCarriers your local UniCarriers
HOUR METER SCREEN HOUR METER SCREEN
Every time the "Mode" button [12] is pressed, the screen Every time the "Mode" button [12] is pressed, the screen
changes as follows: changes as follows:
→ → → →
Main screen Main screen Power consumption screen Power consumption screen
screen screen
The current hour The current hour m
• •
the + button [13] and holding it down for a while. The the + button [13] and holding it down for a while. The
current data will be shifted to the left row in the history current data will be shifted to the left row in the history
table. table.
Three rounds of past Three rounds of past
• •
table. table.
Actual operating tim Actual operating
• •
drive motor or pump motor drive motor or pump motor
Operating rate: Operating rate:
• •
the key switch is kept in the key switch is kept in
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
tion [2] tion [2] represe represe nts the nts the
time [3] represents time [3] represents
truck so far. truck so far.
the power consumption [2] and the power consumption [2] and
and remaining battery and remaining battery
indicator. indicator.
is is chan chan ged ged to to a a batt batt ery ery
dealer. dealer.
→ →
meter data can be r eter data can be reset by pressing eset by pressing
data can be stored i data can be stored in the history n the history
time: the total e: the total conduction time conduction time
Actual Actual operating time/the operating time/the
the "ON" position the "ON" position
https://www.forkliftpdfmanuals.com/
power power
the length the length
whose whose
Hour meter Hour meter
of the of the
total total time time
1. 1. Key Key
time time
2. 2. Drive Drive
conduction time conduction time
3. 3. Pump Pump
conduction time conduction time
2-10 2-10
1. 1. Power Power consumption consumption
indicating area indicating area
2. 2. Power Power consumption consumption
3. 3. Remaining Remaining
time time
4. 4. "Mode" "Mode" button button
5. 5. + + button button
4. 4. Distance Distance
5. 5. Actual Actual
time time
6. 6. Operating Operating
7. 7. T T otal otal time time
8. 8. Date Date on on
recording of data recording of data
was started was started
switch switch "ON" "ON"
9. 9. Past Past data data
1 0. 10. Current Current
motor motor
1 1. 11. 3 rounds 3 rounds
data data
motor motor
1 2. 12. "Mode" "Mode"
13. 1 3. + + button button
battery battery
traveled traveled
operating operating
rate rate
which which
data data
of past of past
button button