UniCarriers FRSB14-8 Operation & Maintenance Manual page 52

INTERLOCK WARNING LIGHT INTERLOCK WARNING LIGHT
Light comes on when the operator is not in the Light comes on when the operator is not in the
operator's seat. With the interlock warning light ON, the operator's seat. With the interlock warning light ON, the
truck won't travel and the load handling system won't truck won't travel and the load handling system won't
operate. operate.
If the key switch is turned to the "ON" position with no If the key switch is turned to the "ON" position with no
operator present in the operator's seat, the neutral operator present in the operator's seat, the neutral
safety indicating light blinks and the interlock warning safety indicating light blinks and the interlock warning
light comes on. The truck won't travel. When the light comes on. The truck won't travel. When the
interlock system is activated, number 105 or 106 is interlock system is activated, number 105 or 106 is
shown on the screen. For the procedure for releasing shown on the screen. For the procedure for releasing
the interlock system, see page 2-24. the interlock system, see page 2-24.
LOAD METER LOAD METER
The load meter indicates the weight of the load being The load meter indicates the weight of the load being
carried on the forks. The measurement of the load carried on the forks. The measurement of the load
weight [1] starts 3 seconds after both the travel and load weight [1] starts 3 seconds after both the travel and load
handling systems are stopped, and is repeated after handling systems are stopped, and is repeated after
that every 0.5 seconds for 4 seconds. The load meter that every 0.5 seconds for 4 seconds. The load meter
keeps showing the most recently measured value until a keeps showing the most recently measured value until a
new measurement is obtained. new measurement is obtained.
If the "+" button [2] on the keypad is pressed and held If the "+" button [2] on the keypad is pressed and held
down while the instrument panel is showing the main down while the instrument panel is showing the main
screen, the truck is stationary, and the load handling screen, the truck is stationary, and the load handling
levers are in neutral, the load meter will be reset levers are in neutral, the load meter will be reset
If the load weight is a minus value, the load meter will If the load weight is a minus value, the load meter will
read zero. read zero.
NOTE NOTE
The load weight [1] shown on the screen should only The load weight [1] shown on the screen should only
be used as a guide. It is not necessarily accurate be used as a guide. It is not necessarily accurate
because it is calculated using the hydraulic pressure because it is calculated using the hydraulic pressure
applied to the lift cylinders. applied to the lift cylinders.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
to zero. to zero.
2-8 2-8
https://www.forkliftpdfmanuals.com/
1. Measurement 1. Measurement
2. 2. + + button button