UniCarriers FRSB14-8 Operation & Maintenance Manual page 66

BATTERY CONNECTORS [1] BATTERY CONNECTORS [1]
WARNING WARNING
M a k e s u r e t h e b a t t e r y c o n n e c t o r s a r e M a k e s u r e t h e b a t t e r y c o n n e c t o r s a r e
• •
disconnected before trying to touch any of the disconnected before trying to touch any of the
internal electric parts. internal electric parts.
There is voltage present in There is voltage present in
• •
even when the key switch is turned "OFF". even when the key switch is turned "OFF".
The battery connectors are used to make and break the The battery connectors are used to make and break the
connection between the battery and the truck's electric connection between the battery and the truck's electric
parts. Under normal conditions the battery connectors parts. Under normal conditions the battery connectors
connected. connected.
NOTE NOTE
T u r n t h e k e y s w i t c h " O F F " , f i r s t , b e f o r e T u r n t h e k e y s w i t c h " O F F " , f i r s t , b e f o r e
• •
disconnecting the battery connectors. disconnecting the battery connectors.
Make sure the key switch is "OFF" before trying to Make sure the key switch is "OFF" before trying to
• •
connect the battery connectors. connect the battery connectors.
WORK LIGHTS [2] WORK LIGHTS [2]
CAUTION CAUTION
Make sure that the work lights turn on and off as Make sure that the work lights turn on and off as
they should. If a light bulb is blown out, replace they should. If a light bulb is blown out, replace
with a new one. If the lens is dirty or damaged, with a new one. If the lens is dirty or damaged,
clean or repair it. clean or repair it.
The truck has work lights as standard equipment. Keep The truck has work lights as standard equipment. Keep
the lenses clean and intact at all times. the lenses clean and intact at all times.
SIDEVIEW MIRROR [3] SIDEVIEW MIRROR [3]
WARNING WARNING
When traveling in reverse, always look in the When traveling in reverse, always look in the
direction of travel to make sure there is no one direction of travel to make sure there is no one
around the truck or in the path of travel. Do not around the truck or in the path of travel. Do not
put too much condence in the sideview mirrors. put too much condence in the sideview mirrors.
The sideview mirrors are located on the overhead The sideview mirrors are located on the overhead
guard, to use when checking the area behind the truck. guard, to use when checking the area behind the truck.
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
the main circuit the main circuit
2-22 2-22
https://www.forkliftpdfmanuals.com/
1 1
3 3
2 2