Setting the Panel ID for each Panel Network
Fiber-Optic and Twisted-Pair Wiring between Multiple Panels
A mixture of fiber-optic cable and twisted-pair wiring between multiple panels is shown in Figure 5.9. Class X cabling is shown with a dot-
ted line.
5.4 Setting the Panel ID for each Panel Network
NOTE: It is important that much thought is given when choosing the network IDs for each panel. It is difficult to change the IDs once the panel
programming has begun.
Use the DIP switch positions 1 through 5 to set the
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
PORT 1
PORT 2
LAST
CONTROL
PANEL
SK-NIC
PORT 1
PORT 1
PORT 2
Fiber In
NEXT
PORT 2
CONTROL
PANEL
Fiber Out
SK-NIC
PORT 1
FIRST
CONTROL
PANEL
Fiber In
SK-NIC
PORT 2
Fiber Out
Figure 5.9 Twisted-Pair and Fiber-Optic Combination Wiring Example
Network
Figure 5.10 Network ID Settings
Class X
Wiring
ID for each panel. See Figure 5.10 below for possible DIP switch settings.
Networking Common Communicator List
59