List Of Sd Slc Devices - Honeywell IFP-75 Installation & Operation Manual

IDP, SK, SD and SWIFT SLC Device Installation

7.3 List of SD SLC Devices

Table 7.3 lists the following SD SLC devices that can be used with the control panel. See the appropriate section number in this manual. For
additional information, refer to the Product Installation Instructions (packaged with the device).
NOTE: The control panel supports the use of the SD SLC or IDP SLC devices. You cannot install a mixture or combination of SLC device types
on the control panel. The SD/SK SLC devices can be used with the SD/SK wireless devices.
Model Number
SD505-PHOTO
SD505-HEAT
SD505-6AB
SD505-6IB
SD505-6RB
SD505-6SB
SD505-DUCT
SD505-DUCTR
SD500-PS/-PSDA
SD500-AIM
SD500-MIM
SD500-ANM
SD500-ARM
SD500-SDM
SD500-LIM
SD505-DTS-K
68
Photoelectric smoke detector.
Absolute temperature heat detector. Trip point range from 135°F–150°F (0°C–37°C).
6" base
6" short circuit isolator base
6" relay base
6" sounder base
Duct Smoke Detector. Duct Housing including the SD505- Analog Photoelectric Smoke Sensor.
Intake tubing for duct available in three lengths: SD505-T2 (2.5 foot); SD505-T5 (5 foot); SD505-
T10 (10 foot)
Duct Detector housing with relay base. Duct housing with relay base including
SD505- Analog Photoelectric Smoke detector pre-installed
Single or dual action addressable pull station
Addressable input module (switch input), standard size, DIP switch configurable
Mini input monitor module (switch input), small size, DIP switch configurable.
Addressable notification module
Addressable relay module DIP switch configurable.
Addressable smoke detector module.
Line isolator module. Fits in a double gang box.
Remote test switch & LED indicator for the SD505-DUCTR
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Model Name/Description
Table 7.3 SD SLC Devices
List of SD SLC Devices
Install Sheet PN
150955
I56-3541
I56-3542
I56-3540
1700-09882
1700-09882
I56-3632
I56-3547
I56-3544
I56-3545
I56-3546
I56-3543
1700-09882