2: Daytime/Nighttime Sensitivity; 3: Holiday Days - Honeywell IFP-75 Installation & Operation Manual

System Options
Phone Line Gains
1. Enter the Installer Code. The panel will automatically access the Main Menu.
2. Select 7 to access the Panel Programming.
3. Select 5 to access the System Options.
4. From the next Menu, select 1 to access the Communication Options.
5. Select 5 to access the Phone Line Gains.
6. The available options are listed as follows:
• Dialing: Low, *High (default), Normal
• Reporting: *Low (default), High, Normal).
l
9.6.2 Daytime/Nighttime Sensitivity
If you need to change the time that sensitivity levels take effect (that is, the time that "Day" and "Night" begin), follow these steps.
1. Enter the Installer Code.
2. Select 7 to access the Program Menu.
3. Select 5 to access the System Options.
4. From the System Options Menu, select 2 for Day/Night Sense.
A screen similar to the one shown in Figure 9.11, "Changing Day/Night Sensitivity Time" will display.
9.6.3 Holiday Days
Up to 18 dates can be designated as holidays. When day/night sensitivity is enabled, all photoelectric smoke detectors in the system will use
night sensitivity for the entire day on days designated as holidays (see Section "Holiday Days" on page 101).
To add or change a holiday, follow these steps.
1. Enter the Installer Code.
2. Select 7 to access the Program Menu.
3. Select 5 to access the System Options.
4. Select 3 to select Holiday Days.
NOTE: For most installations, Holiday programming will need to be performed each year to ensure correct dates.
5. Select the Holiday schedules you want to edit (1- holidays 1 - 9, 2- holidays 10 - 18).
6. Enter the month of the Holiday, then press ENTER.
7. Enter the day of the month for the Holiday, then press ENTER.
8. Repeat Steps 6 and 7 to add any remaining Holidays you want to program.
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Figure 9.10 Phone Line Gains
Figure 9.11 Changing Day/Night Sensitivity Time
Figure 9.12 Edit Holidays Screen
Pre-programmed
Holidays
Programmable
Holiday locations
Programming
101