1: Facp Connection; 2: 5865 Mounting - Honeywell IFP-75 Installation & Operation Manual

5865-3 / 5865-4 LED Annunciator Installation
4.10.1 FACP Connection
The 5865 connects to the panel via the SBUS. Make connections as shown in Figure 4.40. After the 5865 is connected to the panel, it must
be added to the System. This programming step is described in Section 8.
4.10.2 5865 Mounting
Mount the 5865-4 to a standard 4-gang electrical box. Mount the 5865-3 to a standard 3-gang electrical box. In Figure 4.41, the 5865-4
attached to a 4-gang box, is used as an example.
The 5865 ships with a set of zone description labels that can be inserted into the 5865 board assembly. These labels can be used in a type-
writer or can be written on by hand.
Slide the labels under the Plexiglas as shown in Figure 4.42. The LEDs will show through the label when illuminated.
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
supervised
power-limited
Figure 4.40 5865 Connection to the FACP
Attach 5865 to a
standard 3- or 4- gang
electrical box.
Cover Plate
Figure 4.41 5865 Mounting Example
4-gang electrical box.
Use with 5865-4
(Use 3-gang box with 5865-3).
5865 assembly is mounted at the
factory to a plexi-glass plate.
(TR-5865-4 assembly shown).
Control Panel Installation
45